Battery for 20b
#2
Hey...Cut it out!
iTrader: (4)
Where is your battery currently located? That would generally determine what you can fit. In Project OldTree (20B FC), I'm using a Deka Intimidator 9A48. It's a bit bigger than a FC's stock battery and I had to make a custom box to fit in the storage bin, but it was well worth it. 70AH vs stock 55AH, and it was intended to crank a Chevy Silverado's 6.0L V8. The 20B Cosmo came with a 90AH battery and 2.0KW starter from the factory.
FWIW, I can go back to a stock FC battery just by adding a 1.5" spacer on one end in the box. The other dimensions are all the same.
FWIW, I can go back to a stock FC battery just by adding a 1.5" spacer on one end in the box. The other dimensions are all the same.
#3
Junior Member
Thread Starter
iTrader: (3)
Join Date: May 2013
Location: California
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Where is your battery currently located? That would generally determine what you can fit. In Project OldTree (20B FC), I'm using a Deka Intimidator 9A48. It's a bit bigger than a FC's stock battery and I had to make a custom box to fit in the storage bin, but it was well worth it. 70AH vs stock 55AH, and it was intended to crank a Chevy Silverado's 6.0L V8. The 20B Cosmo came with a 90AH battery and 2.0KW starter from the factory.
FWIW, I can go back to a stock FC battery just by adding a 1.5" spacer on one end in the box. The other dimensions are all the same.
FWIW, I can go back to a stock FC battery just by adding a 1.5" spacer on one end in the box. The other dimensions are all the same.
will this battery strong enough.
Thread
Thread Starter
Forum
Replies
Last Post
Mr_Rx7_Au
1st Generation Specific (1979-1985)
5
01-07-04 10:28 PM
RZRX7TT
3rd Generation Specific (1993-2002)
10
03-22-03 08:06 PM
neo_omega
3rd Generation Specific (1993-2002)
5
01-28-02 12:25 PM
dax-93RX7
3rd Generation Specific (1993-2002)
1
10-19-01 11:20 AM