20BEAST FD build.
#109
Update,
Going ***** out now to finish by a event at the end of may.
Dash is out and all the abs is stripped as well as all the un-needed wiring. Only thing now going ou the engine bay is lighting function and engine harness.
Going to pull out the carpet and put some sound deadner in.
I also got started on the turbo manifold a little by getting the merge collector done finally.
Going ***** out now to finish by a event at the end of may.
Dash is out and all the abs is stripped as well as all the un-needed wiring. Only thing now going ou the engine bay is lighting function and engine harness.
Going to pull out the carpet and put some sound deadner in.
I also got started on the turbo manifold a little by getting the merge collector done finally.
#111
Mazzei Formula
iTrader: (6)
Awesome work, that merge collector looks amazing. I still need to get those measurements for you, just haven't had time to pickup the hood from storage.
So your going to use the 20b front cover with the FC trigger wheel kit? Are you going to use FD waterpump and alternator?
So then I assume you'll just bolt the trigger wheel to the hub and then the FD pulley in front?
So your going to use the 20b front cover with the FC trigger wheel kit? Are you going to use FD waterpump and alternator?
So then I assume you'll just bolt the trigger wheel to the hub and then the FD pulley in front?
#112
Awesome work, that merge collector looks amazing. I still need to get those measurements for you, just haven't had time to pickup the hood from storage.
So your going to use the 20b front cover with the FC trigger wheel kit? Are you going to use FD waterpump and alternator?
So then I assume you'll just bolt the trigger wheel to the hub and then the FD pulley in front?
So your going to use the 20b front cover with the FC trigger wheel kit? Are you going to use FD waterpump and alternator?
So then I assume you'll just bolt the trigger wheel to the hub and then the FD pulley in front?
I did get measurements for the hood. It wont fut my setup
I plan on using a t2/ cosmo front cover with the 20b front pully. I havnt got to that point yet but im sure i will have to make a bracket for the hall sensor to sit right.
I plan on using fd water pump and alt.
#121
OMG a Chupacabra!
iTrader: (26)
Question about your oil pan/pick-up...
Do you foresee any problems with a modified oil pick-up? I am assuming you're going to or have already modified the oil pick-up (which I overlooked if you have).
If you shorten the pick-up, or delete that dip when it first comes off of the motor and just basically make a 90* bend, will that negatively interfere with oil flow?
Do you foresee any problems with a modified oil pick-up? I am assuming you're going to or have already modified the oil pick-up (which I overlooked if you have).
If you shorten the pick-up, or delete that dip when it first comes off of the motor and just basically make a 90* bend, will that negatively interfere with oil flow?
#122
Question about your oil pan/pick-up...
Do you foresee any problems with a modified oil pick-up? I am assuming you're going to or have already modified the oil pick-up (which I overlooked if you have).
If you shorten the pick-up, or delete that dip when it first comes off of the motor and just basically make a 90* bend, will that negatively interfere with oil flow?
Do you foresee any problems with a modified oil pick-up? I am assuming you're going to or have already modified the oil pick-up (which I overlooked if you have).
If you shorten the pick-up, or delete that dip when it first comes off of the motor and just basically make a 90* bend, will that negatively interfere with oil flow?