If any one needs an exhaust flange for building a 20B exhaust header, i have 2-extra 1/2" mild steel flanges left. (water jet cut)

I can build the header if needed.

$90 shipped.

Hope this can stay in the 20B forum due to the lack of interest for the 3-rotor in the normal classifieds.

 

I have 2 x 1/2" steel flanges right now to sell for $80 shipped each if any one is interested and a 3/8" stainless flange for $100 shipped.

 

What's the specs on the exhaust port cut?
Is it 2.0" or is it oversized to compensate for pipe O.D.?


-Ted

 

over sized to fit 2 1/4" od pipe or 2 1/8" id primary tubes.

If you want to run smaller primary tubes you can run a short sleeve as a bushing which some do any way to add to the strength at the mounting point where most of the stress is!

 

Perfect!
I think we can use one of these things.
I'll hopefully contact you soon for one of the flanges.
Thanx for offering such custom products!


-Ted

 

i have 2-mild steel 1/2" flanges left for 20B with 2 /1/4" holes. Water jet cut, perfect.
Will sell for $90 each shipped.

 

I'll take one. Sent you a PM.

 

I'll take the other if it's still available. I'll send you a PM.

 

I got one of his 20b ss exhaust flanges awhile back.
Nice quality.

 

thank you for the feed back. I am glad it worked for you.

I only have the two left and it looks like they might both be gone.

 

both flanges are bought and paid for. Thank you.. Will ship tommorrow morning.

I have a 3/8" stainless flange i may be selling. $130 shipped.

 

I re-designed the exhaust flange. Drawing it my self on Autocad several times until it was perfect. The old design was fine which i did not draw but this new one is perfect. A little thicker were needed and thinner where it is not. An exact replica of the turbo exhaust gaskets connected together with holes for 2.25" primary tubes.

$125 each. LASER CUT FROM 3/8" STAINLESS!

 

I now have 4-flanges left.

$125 shipped inside of the U.S.

 

I would like one of the flanges. I'll send you a PM.

Stan

 

Bump this thread because i have 6 flanges left and want to sell them fast.

The demand was there as i was selling them and ordered 10 more. Now things slowed down and i have 6 left which i don't need!

$100 each includes freight!

3/8" stainless steel laser cut for a perfect fit!