Short story

Installing new center bearing into stationary gear and i need to know which side goes notch to (side with ring gear or other one)

and if it has to be 100% flush with flat side or not? (mine was not)

If somebody has detailed pics of center gear with bearing installed , it would help

thanks!

 

Maybe this will help

 

nope, this picture does not really help, as it is not showing notch

 

Just double checked one that I have on the shelf. The notch is on the bolt flange side and the bearing protrudes 1mm

 

weird , 20B i took apart had it about 1mm into stat.gear, not out of it..