1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Yet another stupid question before I jump in.

Thread Tools
 
Search this Thread
 
Old 04-01-02, 05:55 PM
  #1  
Junior Member

Thread Starter
 
matthewk's Avatar
 
Join Date: Mar 2002
Location: TX
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Yet another stupid question before I jump in.

Here is the lame question of how much does it cost to make it fast.

I have a Integra GS-R that is about 2850#'s and about 150 - 160 hp to the wheels that I run on the track and sometimes on the street when my SUV (yuck!!) is really boring me. However, I cannot for the life of me get into front wheel drive, so it has to go.

I am going to buy a 81+ and do suspension and brakes, but I am sure that the measly 110hp that these come with is going to not be enough. So here is my question, What is the cost and is it even possible to make this car be a bit faster than my Integra, not be stupidly loud, and be somewhat reliable? Tall order?

I have no problem doing the work myself so I am not concerned with cost of labor other than machine work, and I will buy a rx-7 that is in good running order to start with.

Thanks for taking the time to answer this!

matt
Old 04-01-02, 06:26 PM
  #2  
smog nazi destroyer

 
riffraff's Avatar
 
Join Date: Jul 2001
Location: california
Posts: 1,681
Likes: 0
Received 1 Like on 1 Post
it is quite easy to make it faster than an integra.. free flowing exhaust, new carb and intake. porting your engine would help a lot too
Old 04-01-02, 06:27 PM
  #3  
Full Member

 
adssoccer's Avatar
 
Join Date: Feb 2002
Location: Omaha, NE
Posts: 247
Likes: 0
Received 0 Likes on 0 Posts
i'd say a turbo or supercharger will be needed to get that hp
Old 04-01-02, 06:59 PM
  #4  
male stripper

iTrader: (1)
 
jeremy's Avatar
 
Join Date: Oct 2001
Location: St Petersburg, FL
Posts: 3,131
Likes: 0
Received 1 Like on 1 Post
remember this car only weighs in at 2385lb too. its not just horsepower but power/weight ratio you need to look at.
Old 04-01-02, 07:21 PM
  #5  
Chad Carson

iTrader: (29)
 
Fire85GSLSE's Avatar
 
Join Date: Nov 2001
Location: South of Nashville TN. USA
Posts: 7,010
Likes: 0
Received 0 Likes on 0 Posts
Re: Yet another stupid question before I jump in.

Originally posted by matthewk
Here is the lame question of how much does it cost to make it fast.

I have a Integra GS-R that is about 2850#'s and about 150 - 160 hp to the wheels that I run on the track and sometimes on the street when my SUV (yuck!!) is really boring me. However, I cannot for the life of me get into front wheel drive, so it has to go.

I am going to buy a 81+ and do suspension and brakes, but I am sure that the measly 110hp that these come with is going to not be enough. So here is my question, What is the cost and is it even possible to make this car be a bit faster than my Integra, not be stupidly loud, and be somewhat reliable? Tall order?

I have no problem doing the work myself so I am not concerned with cost of labor other than machine work, and I will buy a rx-7 that is in good running order to start with.

Thanks for taking the time to answer this!
matt


Not to bust your ball or anything but an Integra GS-R is not really that fast. (I had one) Wish I would have kept the 5.0 instead, but then I got my first RX7.
But back to your question,

Try to find one with a bad motor so you can get it cheaper. Buy a 13b rotory and have it street ported with a good carb and maybe run a MSD setup.
You could even go to a turbo set up if you want, but a good streetport should be fine.

Hope this helps
Old 04-01-02, 07:46 PM
  #6  
smog nazi destroyer

 
riffraff's Avatar
 
Join Date: Jul 2001
Location: california
Posts: 1,681
Likes: 0
Received 1 Like on 1 Post
if you have a good street port, then you will be able to get faster than the integra without going to forced induction.. i have a street ported 13b, stock niki carb, and a free flowing exhaust, and quite frankly i could kick the pants off that car.

Last edited by riffraff; 04-01-02 at 08:13 PM.
Old 04-01-02, 08:02 PM
  #7  
Junior Member

Thread Starter
 
matthewk's Avatar
 
Join Date: Mar 2002
Location: TX
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
What is the best way to get a 81+ with a 13b? What year 13b motor are you running?

matt
Old 04-01-02, 08:12 PM
  #8  
smog nazi destroyer

 
riffraff's Avatar
 
Join Date: Jul 2001
Location: california
Posts: 1,681
Likes: 0
Received 1 Like on 1 Post
i am runing a 13b out of a '78 rx-4.. it is the old 4port style.

your best bet is to try and find an 81 with no motor, or one that is almost dead or what not.. that way it will be less expensive.. as far as finding a motor, look in the junk yards or talk to people who are parting out their cars..
Old 04-01-02, 09:13 PM
  #9  
Hunting Skylines

 
REVHED's Avatar
 
Join Date: Apr 2001
Location: Brisbane, Queensland, Australia.
Posts: 3,431
Likes: 0
Received 2 Likes on 2 Posts
You can get 160hp easily out of a 12A with a street-port, free flowing ehaust and the right intake setup.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
_Tones_
Adaptronic Engine Mgmt - AUS
10
05-25-21 05:37 AM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
stickmantijuana
3rd Generation Specific (1993-2002)
13
01-09-18 11:19 AM
Devon300zx
2nd Generation Specific (1986-1992)
15
09-16-15 06:57 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM



Quick Reply: Yet another stupid question before I jump in.



All times are GMT -5. The time now is 02:03 PM.