Well when i got my engine the pulley on the front of the motor with the red and yellow timing ticks wasnt installed. Does it have to be installed at a certain spot? How do i kno where the tick marks have to be when installing?

 

With the acentric shaft keyway in the 9 o'clockish position the tick marks should line up with the timing pin.

 

 

so wich mark should line up with it perfectly? Theres a red and yellow, dont really remember wich is wich. But say i put one mark on the left of the line and one on the right, wich should be directly on it, the left of the right one? when looking at the front of the engine, from the front

 

the yellow mark which is leading goes first.

 

ok so that goes prettyy much right on the pin ok

 

yes. you will line up the pin on the front cover with the yellow mark on the pulley.

 

Thanks a ton mazdaverx713b, youve helped alot

 

no prob. need any more help, please let me know

 

are you keeping it fuel injected or going carb?

 

Fuel injected, for now. Maybe in a year or so ill go carbed, but as soon as i find a 2nd gen imma take its fuel AFM and then remove the air box and run a k & N cone filter in front of my radiator. Someday im hoping for carb thou

 

nice. i was needing some parts for the EGI system, thats why i had asked.

 

I have a aftermarket pulley tghat has about 6 marks on it and it is much lighter than the stock one.

Don't know which one I'm supposed to time it on and wether or not it is worth the trouble.

 

i hear the underdrive pullies are not worth the time. the put more draw to our already weak alternators.