I would be interested in this as well.

 

Ok, attached is a pic of the setup on my car. Ignor the HEI module mounted off of the dizzy, I fried my trailing ignitor so I threw that one on temporarily. I could make these harness to accept both Hei modules or factory ignitors (just something to think about.) As far as price, the materials are pretty cheap, but considering the time it takes to solder everything and the scarcity of ignitor connectors I think $100 would be fair, it will include everything minus the coils, ignitors, and plug wires, yes I will make brackets too.

 

and another pic. Keep in mind this was kinda the "prototype" all of the ones that I make to sell will look much better than this harness. If you want to make your own brackets I will offer the harness itself for $75.

 

I'm interested as well.....

Be sure to keep us updated on what a finished model will look like, and prices.

 

Looks Good



You might want to mount that third coil horizontally under the 1st two though.

 

I am very interested.

 

For all of those that are really interested, I am working on collecting all of the materials (wire, relays, connectors, etc.) Drop me an E-mail or PM me with your E-mail address and I will get back to everyone on an individual basis once I get my sheeot together. My E-mail is Jsinrx7@hotmail.com
Thanks, Jason

 

The main thing that I definitely want to see is a coil-mounting bracket that can accomodate 3 coils in an upright position very solidly. Someone around here was machining a nice metal bracket that was similar, I'll have to look it up.

But another important thing for me is that I not have to drill many (or ANY) new holes to mount things if I don't have to.

And yeah, a harness of some type for the ignitors is definitely peaking my interest. DLIDFIS would be so much easier with just a snap-in kit, but since when have our cars ever wanted to be easy ?

Definitely interested! I would be buying in the late spring/early summer if they were available.

Jon

 

There, I found the awesome coil bracket thread:

https://www.rx7club.com/showthread.p...hlight=DLIDFIS

If we could get bwaits to make brackets like that but that mounted vertically, and get jsinrx7 to make the mounting harness for the ignitors, we'd have an AWESOME DLIDFIS setup on our hands!

Then again, the issue of price with bwaits' brackets came into question.. it's not like those are cheap to make... But hell, for something that looks that nice, I'd pay for it!

The big reason I stress mounting the coils vertically is because LSD coils and other high-quality coils don't like being mounted horizontally.

In any case, definitely interested in whatever can be come up with. Those mounting harnesses you've got in your pics jsinrx7 are pretty sweet! Any guesstimate at what they'd cost? I'll e-mail you, but I figure the folks on the forum would like an easy way to find out.

Jon

 

I am definitely interested too, hurry before i end up buying an MSD..