Wire ubication
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Jan 2018
Location: Pr
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Wire ubication
Hello greetings I have a Mazda rx7 gsl se of 85 and when connecting 2 msd with coils the injectors that come out of pressing what would be the right way to install it or what is the cable that carries the signal to the computer so that the injectors press thanks advanced
#2
Damn, it did start!
welcome!
I have read this multiple times and end up confused. I thought the SE used the old distributor set up. I'm not remembering the injectors being part of the coil circuit. Consider this a bump and hopefully someone can helpout here.
I have read this multiple times and end up confused. I thought the SE used the old distributor set up. I'm not remembering the injectors being part of the coil circuit. Consider this a bump and hopefully someone can helpout here.
#3
84SE-EGI helpy-helperton
You need to clarify your question with more detail and a complete and readable sentence.
If you're asking which wire lead is used by the ECU to identify when to fire the injectors, there's a white wire with spade connector which goes to the Trailing Coil as a triggering signal for the EFI.
If you're asking which wire lead is used by the ECU to identify when to fire the injectors, there's a white wire with spade connector which goes to the Trailing Coil as a triggering signal for the EFI.
Thread
Thread Starter
Forum
Replies
Last Post
yourmom23
3rd Generation Specific (1993-2002)
5
10-15-16 05:32 PM
TheRX7Project
1st Generation Specific (1979-1985)
0
09-18-16 01:42 PM
im2bad4ya
Old School and Other Rotary
0
09-13-16 06:37 PM