Wire ubication
 

Hello greetings I have a Mazda rx7 gsl se of 85 and when connecting 2 msd with coils the injectors that come out of pressing what would be the right way to install it or what is the cable that carries the signal to the computer so that the injectors press thanks advanced

welcome!

I have read this multiple times and end up confused. I thought the SE used the old distributor set up. I'm not remembering the injectors being part of the coil circuit. Consider this a bump and hopefully someone can helpout here.

You need to clarify your question with more detail and a complete and readable sentence.

If you're asking which wire lead is used by the ECU to identify when to fire the injectors, there's a white wire with spade connector which goes to the Trailing Coil as a triggering signal for the EFI.

i couldnt' make out exactly what he was asking either. since his location is PR i'm guessing his english isn't very good. maybe he pulled the injectors out and can't seem to get them back in?

How connect 2 msd 6al and 2 blaster2 coils in my rx7 with factory ecu the problen is no injectors pulse