wheels
#1
Full Member
Thread Starter
iTrader: (6)
Join Date: May 2012
Location: pennsylvania
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
wheels
Are there any adapters availible from our 4x110 to anything else? Found a pair of autobahn like wheels that I can get new with what ever offset/ width I need. I think the bolt pattern is 4X4.5 any ideas are appreciated.
Trending Topics
#9
love the braaaap
An alternative to adapters would be to use whats called a wobble lug bolt with a 4x108 wheel. The head and conical seat of the bolt actually wobble to adjust to a different bolt patter from what the bolt is being threaded into. Most i have found will allow up to about 2mm difference. Not sure how safe these would be in autox but there is a decent selection of 4x108 wheels available for the older 4 bolt Fox body Mustangs. 4x108 is the same as 4x4.25".
#11
"4x108 is the same as 4x4.25"
#14
For the record 108mm is 4.2519 inches. Thats a meer 1.9 thousands of an inch off 4.25". That amount is less than the thickness of a piece of paper.
#15
Vapor locked
Join Date: Aug 2012
Location: Niagara Falls NY
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
An alternative to adapters would be to use whats called a wobble lug bolt with a 4x108 wheel. The head and conical seat of the bolt actually wobble to adjust to a different bolt patter from what the bolt is being threaded into. Most i have found will allow up to about 2mm difference. Not sure how safe these would be in autox but there is a decent selection of 4x108 wheels available for the older 4 bolt Fox body Mustangs. 4x108 is the same as 4x4.25".
Really would like to find a set of 14" rims for this car tho - 13" quality tires just don't exist anymore apparently!!
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM