Wheel Fitment?
#1
Rotary Freak
Thread Starter
iTrader: (19)
Join Date: Oct 2007
Location: Colorado Springs, CO
Posts: 2,014
Likes: 0
Received 0 Likes
on
0 Posts
Wheel Fitment?
I'm looking at Superlite Wheel, 15" x 8", 4 mm - Offset 4x110 all the way around. I will be installing the 240z flares so I want a wheel that will stick out and match the flare but will bot rub.
Will these wheels work?
Are these a good quality wheel?
thanks Chris
Will these wheels work?
Are these a good quality wheel?
thanks Chris
#2
Old Fart Young at Heart
iTrader: (6)
Good wheels, a bit pricey. Not sure if you need the + or - offset though. Read through my 'How To' in the archives on trimming out the fender lips. That's the only way you can fit 8" wide rims, especially on a lowered car.
https://www.rx7club.com/1st-gen-archive-71/body-how-modify-wheel-wells-fender-flares-733340/
https://www.rx7club.com/1st-gen-archive-71/body-how-modify-wheel-wells-fender-flares-733340/
#3
Rotary Freak
Thread Starter
iTrader: (19)
Join Date: Oct 2007
Location: Colorado Springs, CO
Posts: 2,014
Likes: 0
Received 0 Likes
on
0 Posts
I have read your How to, great info.
I looked into getting the RB wheels but they are only +20 offset. I would be happy with 15x7s if I can get some that have a good offset that work with the flares.
I don't want wheels that are skinny and stick out real far.
Does anyone sell a 15x7 or 15x8 0 offset wheel that has a similar look?
I looked into getting the RB wheels but they are only +20 offset. I would be happy with 15x7s if I can get some that have a good offset that work with the flares.
I don't want wheels that are skinny and stick out real far.
Does anyone sell a 15x7 or 15x8 0 offset wheel that has a similar look?
#4
Old Fart Young at Heart
iTrader: (6)
Try this website. You can plug in wheel and tire sizes to see what will/won't fit. I don't know how far the Z flares extend the fenders ofer stock, hopefully somone who has installed them will chime in.
http://www.bigcustomwheels.com/info_specs.jsp
http://www.bigcustomwheels.com/info_specs.jsp
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM