What plugs? in my Rotary engineering 13b
#1
Full Member
Thread Starter
Join Date: Mar 2007
Location: Il
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
What plugs? in my Rotary engineering 13b
I let the car sit for a while and I think the plugs are bad now. I am wondering what plugs I should buy to put back in it. The motor is a rotary engineering 13b, I believe bridge port. I have done some research but wanted to get some personal opinions. Also as a side note. Does anyone know if these motors are just a large street port or if they are a bridge.
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,844
Received 2,606 Likes
on
1,849 Posts
what plugs are in it now?
RE built street ports and bridge ports, it could be either
RE built street ports and bridge ports, it could be either
#3
Full Member
Thread Starter
Join Date: Mar 2007
Location: Il
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Well I know it's the turbo alternative. I still have the original paperwork. I forget what plugs I put into it. I believe they were just stock repu plugs at the time. I know it deserves more though.
Thread
Thread Starter
Forum
Replies
Last Post