what mufflers do you run?
#26
Senior Member
Thread Starter
iTrader: (2)
Join Date: Sep 2007
Location: lewisburg tennessee
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
oh i know about loud cars. my last first gen was straight piped to a fart pipe. it was terrible lol. my 04 mustang gt had flowmasters. it sounded amazing. the car is actually loud enough as is, but it really sounds like a loud *** buzzing bee. it sounds almost like an exhaust leak out the tail pipe. its really hard to explain the sound of a car over the internet, but trust me, its not good. i guess i sounded to enthusiastic over it just being loud, but i want a smooth sounding hum thats loud. not a rasp or buzz.
#27
Banned. I got OWNED!!!
iTrader: (7)
Join Date: Dec 2008
Location: Oregon
Posts: 1,326
Likes: 0
Received 0 Likes
on
0 Posts
I have an rb header to strait pipe (not sure of diameter) to an apex'i dunk. I'm sooo surprised I haven't been pulled over (knock on wood). But been followed for some time. I did not buy the dunk it was on my lancer. I'll buy a good muffler and a pre silencer eventually. I had a Honda tell me he was at 112 db w/ an open exhaust no muffler. I was much louder. I'm nervous about revving to red line because cops will hear me.
#28
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,900
Received 2,643 Likes
on
1,872 Posts
mine is some crappy header into 3" pipe into a glasspack and a borla. it sounds pretty good, but its too loud
it was a tad quieter than the stock manifold into a glasspack and a turndown before the axle
not sure what the next setup will be, it needs to be quieter though
it was a tad quieter than the stock manifold into a glasspack and a turndown before the axle
not sure what the next setup will be, it needs to be quieter though
#29
Sleeper but still slow
iTrader: (1)
Join Date: Jan 2006
Location: Georgia
Posts: 1,766
Likes: 0
Received 0 Likes
on
0 Posts
RB road Race header, high flow 2-into-one collector, custom straight pipe, RB power pulse muffler.
http://www.youtube.com/watch?v=zuvrhTXezPw
http://www.youtube.com/watch?v=zuvrhTXezPw
#31
Environmentally-Hostile
Dynatech split flow!! Racing beat street header immediately into the dynatech followed by 2.25'' piping to a 10'' ebay special dump tip muffler that exits right at the rear valence. Both mufflers are SS packed and damn good quality, which especially good considering the dump tip was an ebay special.
http://www.youtube.com/watch?v=TbudnONAXcw
http://www.youtube.com/watch?v=TbudnONAXcw
#32
Doesn't suck
iTrader: (5)
Join Date: Dec 2004
Location: Pensacola FL
Posts: 701
Likes: 0
Received 0 Likes
on
0 Posts
my turbo sounded great with 3-inch back to a magnaflow straight through. Very sweet howl at redline, like an old carb'd v12 but slightly less refined.
now with the bigger turbo and SS header I'm running open downpipe till I can get to the exhaust shop, it's bad, terrible really, but not ear bleeding loud.
now with the bigger turbo and SS header I'm running open downpipe till I can get to the exhaust shop, it's bad, terrible really, but not ear bleeding loud.
#33
Dr. Drift
iTrader: (2)
Join Date: Jan 2009
Location: Salem OR
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Had Gutted cat, straight piped cat, stock cat with pick up tube, with a 3" out the back, sounded gorgeous, dear God i miss it, now iv got Racing Beat streetable header, 2.5 inch cat delete pipe with a fabbed up pick up tube into stock muffler, sounds like a louder stock set up with no muffler... =( really makes me sad cuz i miss my old sound but this has way more power and is faster so.... gotta make sacrifices i guess
#34
Lurking on thread near U
Join Date: Dec 2008
Location: Huntsville, Alabama
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Custom stainless headers, Thrush 3" glasspack, and 3" medium tone Magnaflow muffler, it's PLENTY loud, but the thrush helps cut down the metallic sound so characteristic of the magnaflows so it really sounds good. Everyone tells me it's hard to tell it apart from a hyaboosa crotch rocket (except that mine's faster haha). Of course It's running a half bridgeport so that changes the sound a bit too.
#35
The Shadetree Project
iTrader: (40)
magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow magnaflow
Borla's sound amazing, but they're more expensive, the build quality sucks, they blow up from backfires, and they XRS are in fact crushbent. XR-1's might not be.
borla FTL: https://www.rx7club.com/1st-gen-general-discussion-207/couple-pics-my-new-setup-807548/
https://www.rx7club.com/showthread.p...backfire+borla
Racing beat makes mufflers strong as tanks and they sound great, but they don't make the most power if that's your goal.
Flowmaster's rot out after 6 months to a year of rotary heat.
Dynomax make amazing resonators, but their mufflers are glass packed and will get really loud with age.
Magnaflows are built like tanks and can take some serious backfires, just ask anyone who's driven behind me. steel wool wrapped core with rock wool filler. FTMFW!
http://www.youtube.com/watch?v=U0vbPTuvCzs
Magnaflow muffler, and 2 dynomax bullet presilencers + a small street port make this sound. Loud as hell but fun.
http://furinox.com/jappweb/index.php...id=4&Itemid=28
Borla's sound amazing, but they're more expensive, the build quality sucks, they blow up from backfires, and they XRS are in fact crushbent. XR-1's might not be.
borla FTL: https://www.rx7club.com/1st-gen-general-discussion-207/couple-pics-my-new-setup-807548/
https://www.rx7club.com/showthread.p...backfire+borla
Racing beat makes mufflers strong as tanks and they sound great, but they don't make the most power if that's your goal.
Flowmaster's rot out after 6 months to a year of rotary heat.
Dynomax make amazing resonators, but their mufflers are glass packed and will get really loud with age.
Magnaflows are built like tanks and can take some serious backfires, just ask anyone who's driven behind me. steel wool wrapped core with rock wool filler. FTMFW!
http://www.youtube.com/watch?v=U0vbPTuvCzs
Magnaflow muffler, and 2 dynomax bullet presilencers + a small street port make this sound. Loud as hell but fun.
http://furinox.com/jappweb/index.php...id=4&Itemid=28
#38
RAWR
iTrader: (3)
im looking for something loud. i would straight pipe it, but i dont want it to sound like a tractor lol. i have a nice quiet daily driver so i want this thing to make some noise.
i like the way this looks, but im sure its poor quality.
http://cgi.ebay.com/ebaymotors/3-Exh...1%7C240%3A1318
i like the way this looks, but im sure its poor quality.
http://cgi.ebay.com/ebaymotors/3-Exh...1%7C240%3A1318
oh i know about loud cars. my last first gen was straight piped to a fart pipe. it was terrible lol. my 04 mustang gt had flowmasters. it sounded amazing. the car is actually loud enough as is, but it really sounds like a loud *** buzzing bee. it sounds almost like an exhaust leak out the tail pipe. its really hard to explain the sound of a car over the internet, but trust me, its not good. i guess i sounded to enthusiastic over it just being loud, but i want a smooth sounding hum thats loud. not a rasp or buzz.
I have a RB SP exhaust. Sounds great, does not drone at cruise, and it has already outlasted one FB.
#39
7-less
Join Date: Dec 2005
Location: No. Virginia, USA
Posts: 2,053
Likes: 0
Received 0 Likes
on
0 Posts
2nd Gen NA header, reduced to 2 1/2" pipe into new universal catalytic, downsized to 2 1/4 pipe leading to Magnaflow muffler.
Nice mellow tone, still gives off that rotary tone, that's well behaved, nothing raspy or tinny. Really waiting for the day I have the money to afford a full Racing Beat system, tho.
Nice mellow tone, still gives off that rotary tone, that's well behaved, nothing raspy or tinny. Really waiting for the day I have the money to afford a full Racing Beat system, tho.
#42
o.O
iTrader: (3)
I love the sound difference from when i changed from the RB header the manifold and downpipe but i'm still looking for somthing a little different.
I'm thinking about running a 2.5' inch pipe after my downpipe to a 2.5' inch dynatech and then dump it before the rear axle, should be semi-loud and have a sweet tone.
Which exact dynatech do you have starfox? round or oval? and, have you noticed it getting louder since you've added the dynatech, in other words can you tell if the packings starting to deteriorate? i really want something that lasts.
#43
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,900
Received 2,643 Likes
on
1,872 Posts
RB header into 2x2"x31" glass packs into the same 3" borla. the borla needs to go, its sounded great before, but is kinda tinny now. i need something more robust in the back.
the good part is that its almost streetable!
so exhaust 2.0 is ok.
#48
Rotary Enthusiast
iTrader: (8)
Join Date: Feb 2007
Location: Southwest
Posts: 817
Likes: 0
Received 0 Likes
on
0 Posts
I’m running a s4 turbo 3” exhaust and two large Magna Flows, a nice low end rumble but your not going to want to run it on the freeway for a long time. its far from quiet but i love it and d i would not want it louder. If you go from a 2.5" piping to 3" you’re going to be noticeably louder and loose some tq.
Thread
Thread Starter
Forum
Replies
Last Post