Im starting to go insane, I saw it somewhere and forgot to write it down and im having troubles finding it again.

From what I understand I can use Koni Shocks from a foxbody mustang in the rear and that I can use MR2 inserts in the front struts (years 85-86) but I want to make sure. Also if you have a link or part number to the inserts I would really appreciate it.

Thanks.

 

the tokico number is BZ1086

 

Theres my problem, was looking for Koni inserts.
Too hopped up on cough medicine it seems lol. Stupid Cold

 

It's the 85-86 rear mr2 inserts that fit in the front of the fb.

The koni part number is 8641-1072

 

look up tokico number, find out what it fits and then use the application to look up koni's

 

Can anyone confirm this actually works/fits? Within a reasonable amount of adjustments.

 

looks like camber plates will be needed.

https://www.rx7club.com/1st-generati...-nuts-1049701/

 

Camber plates are not needed. You can run the stock mounts, but you need a bushing machined, just like you need with camber plates. No camber plates fit them perfectly. I ran them in my FB with ground control camber plates and I needed shims from Mazdatrix, then i had to have the shims machined