Crazyk82

iTrader: (7)

I'm trying to find out how much fluid a 83 5 speed tranny holds the FSM said 2.1 but my Haynes said 1.8???

7aull

iTrader: (2)

If it were mine, I'd have to figure the factory would be the last best source...

Stu Aull
80GS
Alaska

twinkletoes

iTrader: (17)

Fill until the bottom of the fill hole. I usually do around 1.9 quarts.

mazdaverx713b

iTrader: (91)

i just double checked and yes, the FSM does state 2.1 qts. however, it usually takes about two quarts. the extra .1 of that 2.1 quarts is residual in the gearbox and you'll never be able to fully drain the trans. i like the get the car in the air and level before i start any refilling. i fill the trans until i can touch the fluid with the tip of my index finder when probing the fill hole. this is usually about two quarts.

j9fd3s

iTrader: (3)

haynes is a ***** xerox of the FSM...

FSM is filling from dry...

Crazyk82

iTrader: (7)

Ya I'm filling from dry. And I just need to know how much fluid to order. Thanks

ray green

iTrader: (14)

I'd go with about 2.1 qts, judging from what those guys said. What you putting in there? And how'd you get it dry, is it brand new?

Hyper4mance2k

iTrader: (40)

I've recently filled from dry and it spilled out at 1.8 quarts. so i rolled it around to get the gears saturated, then I quickly crammed the other .2 in as it started spilling out agian. Better safe than sorry, but, I don't think it's going to take mroe than 2 quarts.

Crazyk82

iTrader: (7)

Im putting in Amsoil 75-90. Im doing a swap from auto. And it all drained out when I pulled the engine and tranny out of my parts car and its been sitting for almost 2 months.