I've been looking around at header back exhaust for a while, but i decided (living in south dakota) that i'd have a local shop do it. Its 2.25 double wall will a high performance diesal muffler w/a polished steel tip welded on to the muffler, sounds great and i think looks good, cost $207.

old exhaust.
new exhaust.

tell me what you think, and yes, it does sound good, the guy who owned the shop used to have a 87.

 

Diesel muffler huh,I wonder if those hold-up to heat better...I bet they would,good idea,try to host a sound clip of it.

 

I do have to say it does look really good. Get a sound clip so we can hear it. I'll post mine up when it finalizes with YouTube

 

Looks good although I prefer the factory dual tip look. However, for $207 bucks , I'll say you did very well.

 

Here's my clip. RB header straight back to an RB muffler
http://www.youtube.com/watch?v=Vy4W3E8rzuo

 

Mine is 2.5" with 2 presilencers (quietens the bridgeport quite a bit) and a magnaflow. http://media.putfile.com/bridgeported-supercharged-13b and from inside the car http://media.putfile.com/BRIDGPORTED-13B-COMPILATION . Just so I can get the most out of my engine this is going in in the spring http://www.quicktimeperformance.com/QTEC/index.php

 

And I forgot, this too

 

nos isn't my style, ive seen to many kids in civics think there too bad *** cause they run a 100shot with a factory motor. ghey.

 

i'll post a sound clip when its warm enough to start it. ps, yes, the diesal mufflers do much better with the heat.

 

I only plan on running a 50 shot, will work great as a chemical inner cooler for the camden

 

how do you like your brigde port? i've been trying to decide between that and a street port for my 12a with some oer sidedrafts?

 

The sound of the bridge combined with the blower is sooo sweet I never listen to the radio.

 

Since were throwing up exhaust clips,heres mine.

S5 13BT streetport with a TO4B hybrid S5 turbo,3" downpipe,Bonez cat,3" stainless mandrel bend system and a RB streetport muffler.......

http://smg.photobucket.com/albums/v2...evepics014.flv

 

Link doesn't work...................

 

Worked fine for me. Now Steve you need to get an in car video so we can hear it under load

 

Working on it.
This weather pretty much keeps the RX covered up,Im driving the Sammy mostly now.
Im currently designing a mount to put my new camera on my bikes, so I can lap time/anylize my runs up the St Helena Pass....I think Ill adapt that mounting system to fit up to the RX's 4 point cage too.

 

Sound clips eh?

Borla FTW

http://www.youtube.com/watch?v=XMEMkpTTLIw
http://www.youtube.com/watch?v=QchXiwd1toU
http://www.youtube.com/watch?v=5ivW32cr0bo

And here is your OER Sidedraft:
http://www.youtube.com/watch?v=KFFLJbHaVIE

Best vid I got:

http://www.youtube.com/watch?v=KFFLJbHaVIE



PS: Camera sucks, will not pick up loud sounds without breaking up.

 

god i love the sound of a bridge port

 

Jeezus,

If you want better air flow into the OERs, get rid of those socks and go an oval style filter that surrounds both velocity stacks.

Slate84,

That's a nice shiney muffler. Great price for the upgrade.

 

u guys have inspired me...im gonna make a video tomorrow! hahahaa...well if it isnt raining.

 

My setup:
RB single-outlet header into the RB 'mini' presilencer (a shortened version of their standard presilencer, sold only for '79 models) This then runs into a Magnaflow bottle silencer (straight through perforated stainless steel core) to an over-axle pipe to my Borla.

The result is a agressive but street-legal exhaust note with plenty of bass and a fantastic tone at WOT.

In-car video during a Solo II run: http://www.youtube.com/watch?v=A5yI_osBxY0
MP3 of the car idling and revving on my driveway: http://members.shaw.ca/deuteronomy/Borla.mp3

 

http://www.youtube.com/watch?v=ROdbcjjA_Cc

My setup ... magnaflow. I have another borla to add in the center section now and will see how it sounds with that.

 

huh, what exactly are you talking about trochoid?? I just have the stacks and no filter on my mikuni. I was told the socks work great, but do you mean the k&n one from racingbeat?

btw jeezus, sounds nice

 

Tooooo loud....need the borla installed.

 

That was with my wrap around. Since then I am straight In-N-out. Lake City manifold, no socks. Straight thru exhaust.

Sure, it won't start in the cold. But whatever, in the warm it SCREAMS.