What is the deal with these Mazda "competition" motor mounts?
Trending Topics
#9
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,841
Received 2,605 Likes
on
1,848 Posts
to get optimum use please mail them to the following address
mike #2
420 harbor blvd
belmont CA 94002
thanks!
mike #2
420 harbor blvd
belmont CA 94002
thanks!
#11
Rotary Freak
iTrader: (1)
"These mounts must be installed with a special polymeric epoxy adhesive, which, when cured, is much stronger than steel fasteners. It was pioneered on the Mazda endurance racers back in the '80s and is in common use on all Mazda Competition engine mounts today. If you didn't order the adhesive along with the mounts, simply contact Mazdatrix, and request the polymeric epoxy engine mount adhesive. If they act like they don't know what you're talking about, demand to speak with Koki -- he has been trained by the factory race team on proper installation procedures and is the only North American technician authorized to distribute this special product. The downside to this process is that the cure time is 72 hours and the price is excessive -- upwards of $50 per mount. BTW -- Koki only works every other Tuesday."