Well, the Bug bit me hard!!!... Lookie what i got.
#1
SA all the Way!
Thread Starter
Well, the Bug bit me hard!!!... Lookie what i got.
1979 Mazda Rx7 'S'
Red w/ Black Interior
Perfect body
Blown motor, no trans
drum/open rear
perfect glass, good carpet, perfect dash
price: $000.00
Yes, free.
Project SA Racecar here we come!!!!
pics in a few days.
this is great, because i have 3 good 12a cores that i'm gonna break open, see which is best, port the crap out of it (bridgey here we come)... then put it back together with hardened stationary gears and the racing oil pump. I also have 2 5spd trannies, one for my Daily, one for the racecar. Then i'll buy the RB roadrace header, and run dual straight back to collect at the axle, then into an N1 SS muffler probably. It'll be loud, but i think thats an acceptable bridgey exhaust setup.
i MAY switch my dellorto over to the racecar, and put the best of my 3 Nikki's on the daily driver, or look around for a used IDA (yeah, dream on). As for suspension, Illumina's all around with RB or eibach springs, and the RB front swaybar.... but that'll have to wait until i can sell the chevelle... so you know what that means guys, anyone want a Chevelle?
I'm gonna gut the hell out of it, so start listing me all the crap that can come out, so i can hop on that.... i should be bringing the car here in the next few days, so i'll be able to take pics, and start tearing into her soon.
-Kurt
Red w/ Black Interior
Perfect body
Blown motor, no trans
drum/open rear
perfect glass, good carpet, perfect dash
price: $000.00
Yes, free.
Project SA Racecar here we come!!!!
pics in a few days.
this is great, because i have 3 good 12a cores that i'm gonna break open, see which is best, port the crap out of it (bridgey here we come)... then put it back together with hardened stationary gears and the racing oil pump. I also have 2 5spd trannies, one for my Daily, one for the racecar. Then i'll buy the RB roadrace header, and run dual straight back to collect at the axle, then into an N1 SS muffler probably. It'll be loud, but i think thats an acceptable bridgey exhaust setup.
i MAY switch my dellorto over to the racecar, and put the best of my 3 Nikki's on the daily driver, or look around for a used IDA (yeah, dream on). As for suspension, Illumina's all around with RB or eibach springs, and the RB front swaybar.... but that'll have to wait until i can sell the chevelle... so you know what that means guys, anyone want a Chevelle?
I'm gonna gut the hell out of it, so start listing me all the crap that can come out, so i can hop on that.... i should be bringing the car here in the next few days, so i'll be able to take pics, and start tearing into her soon.
-Kurt
#5
SA all the Way!
Thread Starter
i dont know about the porting really yet, i want to make more power than a big streetport, but a Peripheral port is out of the question, so that leaves J-bridge, Half-bridge and bridge.
so give me pros/cons of both.
so give me pros/cons of both.
Trending Topics
#12
Senior Member
Join Date: May 2002
Location: Australia, Melbourne
Posts: 702
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Keaponlaffen
as far as I know, '79s never came with a/c or power steering, so that's weight already gone
as far as I know, '79s never came with a/c or power steering, so that's weight already gone
#13
SA all the Way!
Thread Starter
yeah, this car has AC. and now its sitting in my driveway.
pics are here: http://home.earthlink.net/~jutny/79rx7/
time to start stripping it down.
pics are here: http://home.earthlink.net/~jutny/79rx7/
time to start stripping it down.
#16
SA all the Way!
Thread Starter
well, the interior is as good as gone... the stock wiring is getting the boot, i'll make my own minimal harness for only what i need.
i'm thinking of putting a cage in.
let me know what large, heavy things can come out other than the ovbious.
and as far as bridgeports go, what kind of power can i make with a 12a bridgeport N/A
i'm thinking of putting a cage in.
let me know what large, heavy things can come out other than the ovbious.
and as far as bridgeports go, what kind of power can i make with a 12a bridgeport N/A
#17
Senior Member
Join Date: Jun 2002
Location: Wayward Hayward
Posts: 735
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by jutny
well, the interior is as good as gone... the stock wiring is getting the boot, i'll make my own minimal harness for only what i need.
i'm thinking of putting a cage in.
let me know what large, heavy things can come out other than the ovbious.
and as far as bridgeports go, what kind of power can i make with a 12a bridgeport N/A
well, the interior is as good as gone... the stock wiring is getting the boot, i'll make my own minimal harness for only what i need.
i'm thinking of putting a cage in.
let me know what large, heavy things can come out other than the ovbious.
and as far as bridgeports go, what kind of power can i make with a 12a bridgeport N/A
Well if your car is an 80' then those bumpers weigh a good amount! If you can replace them you'd save a nice amount of weight.
here are is a pic of the dash I made and a few of the metal version as it sits in the car. Not too bad a fit, shold be great for guages. I guess it's sorta' race type dash but it works for me. I'd still like to play with carbon though.
Still needs to be cleaned up but it's almost done.
and I think I need to make some sorta cowl to cover up the stuff below the steering wheel. It would look much cleaner that way.
#18
SA all the Way!
Thread Starter
can i have that metal dash? That looks REALLY good.
i was planning on doing something like that, but i wasnt sure how to execute it, you did it perfectly, i like.
#19
Senior Member
Join Date: Jun 2002
Location: Wayward Hayward
Posts: 735
Likes: 0
Received 0 Likes
on
0 Posts
I made this one from steel but I think aluminum would be better suited for this job. Still the fiber one is pretty nice, needs paint obviously. Still better would be the CF!
I could make another in aluminum or fiber if your interested? PM me and we can work something out.
I could make another in aluminum or fiber if your interested? PM me and we can work something out.
#20
SA all the Way!
Thread Starter
you got PM!
damn man, i'm still yearning over how those pics look. Any idea what weight you got your car down to?
i'm shooting for 2000lbs w/ driver (me, 180lbs, so that leaves 1820lbs for the car)
also, what options do i have for a Cage?
damn man, i'm still yearning over how those pics look. Any idea what weight you got your car down to?
i'm shooting for 2000lbs w/ driver (me, 180lbs, so that leaves 1820lbs for the car)
also, what options do i have for a Cage?
Thread
Thread Starter
Forum
Replies
Last Post
Kruel13
1st Generation Specific (1979-1985)
24
09-16-15 09:08 AM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM