Weber IDF Jet Question
Thread Starter
Full Member
Joined: Dec 2002
Posts: 61
Likes: 0
From: northwest ohio
Weber IDF Jet Question
hey everyone
I searched but this is a pretty specific question.
What idle jet sizes are you guys running?
I know there are/were at least two other members with Weber 44 IDFs.
And i know theres alot of other variables involved with jetting a carb, but indulge me if you will.
I hoping some other input will help me from buying a crap-ton of jets when i only need two.
I'm running #37s i think. on a stock port 12A, with full RB exhaust (dual presilenced style)
38MM chokes i think.
its too lean, i'm just not sure how lean. Should I just go with #50s to start or bigger? Thanks in advance.
I searched but this is a pretty specific question.
What idle jet sizes are you guys running?
I know there are/were at least two other members with Weber 44 IDFs.
And i know theres alot of other variables involved with jetting a carb, but indulge me if you will.
I hoping some other input will help me from buying a crap-ton of jets when i only need two.
I'm running #37s i think. on a stock port 12A, with full RB exhaust (dual presilenced style)
38MM chokes i think.
its too lean, i'm just not sure how lean. Should I just go with #50s to start or bigger? Thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic S5 Turbo PNP Unit questions
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
heywier427
Naturally Aspirated Performance Forum
2
Sep 11, 2015 04:49 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM
