Weber 48IDA help
#1
CPS Motorsport
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: Fremont, CA
Posts: 1,358
Likes: 0
Received 0 Likes
on
0 Posts
Weber 48IDA help
I just bought a Weber 48IDA, i need some help on the jets and venturies size. The engine is a rebuilt stock GSL-SE 13B 6-port.
Here is the recommend sizes from Racing Beat, I don't know if they are the right choices.
Venturi - 40mm
Fuel Jet - 195
Air Jet - 205
Emulsion Tube - F-4
Needle Valve - 250
Also, where is the cheapest place to buy these parts?
The cheapest price I found right now is this one... http://www.carburetion.com/Weber/weber.htm
Here is the recommend sizes from Racing Beat, I don't know if they are the right choices.
Venturi - 40mm
Fuel Jet - 195
Air Jet - 205
Emulsion Tube - F-4
Needle Valve - 250
Also, where is the cheapest place to buy these parts?
The cheapest price I found right now is this one... http://www.carburetion.com/Weber/weber.htm
#2
Double Ds for me to share
racing beat is pretty accurate with their jetting information
here is a link to where we got our jets and what not
http://www.piercemanifolds.com/products.htm
here is a link to where we got our jets and what not
http://www.piercemanifolds.com/products.htm
#3
Stu-Tron Get Yo Groove On
iTrader: (4)
racing beat is pretty accurate with their jetting information
here is a link to where we got our jets and what not
http://www.piercemanifolds.com/products.htm
here is a link to where we got our jets and what not
http://www.piercemanifolds.com/products.htm
#4
The Shadetree Project
iTrader: (40)
lazy... there was a big IDA thread just a month or 2 ago and you didn't even bother searching for it...
https://www.rx7club.com/showthread.p...&highlight=ida
https://www.rx7club.com/showthread.p...&highlight=ida
#6
CPS Motorsport
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: Fremont, CA
Posts: 1,358
Likes: 0
Received 0 Likes
on
0 Posts
racing beat is pretty accurate with their jetting information
here is a link to where we got our jets and what not
http://www.piercemanifolds.com/products.htm
here is a link to where we got our jets and what not
http://www.piercemanifolds.com/products.htm
Trending Topics
#9
I got #3.00 metal needle from here...
http://www.racetep.com/weber.html
Mazdatrix has the 3.3 glass ball...but I cant's stand those.
http://www.racetep.com/weber.html
Mazdatrix has the 3.3 glass ball...but I cant's stand those.
#12
I got #3.00 metal needle from here...
http://www.racetep.com/weber.html
Mazdatrix has the 3.3 glass ball...but I cant's stand those.
http://www.racetep.com/weber.html
Mazdatrix has the 3.3 glass ball...but I cant's stand those.
...the place is about 5 miles from my house....if you want, I'll pick one up for you and FedEx the ******!...sheesh.
Thread
Thread Starter
Forum
Replies
Last Post