Weber 45dcoe air filter?
#1
Yea, I'm working on it...
Thread Starter
Join Date: Dec 2003
Location: Click click fucking click, Africa
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
Weber 45dcoe air filter?
What part number and where can I get a replacment? I walked in to auto zone and the guy looked me square in the eye and said "we don't carry any lawnmower air filters"......
#2
Still Dreams of 3rd Gen
iTrader: (6)
Join Date: Sep 2003
Location: Owensboro, Ky
Posts: 867
Likes: 0
Received 0 Likes
on
0 Posts
lol, www.cbperformance.com i know you'll like that.
mazdatrix or someone should have them, search for vw performance sites that have k and n's
mazdatrix or someone should have them, search for vw performance sites that have k and n's
#3
Senior Member
#4
Registered pimp
Join Date: Jan 2004
Location: nashville
Posts: 1,286
Likes: 0
Received 0 Likes
on
0 Posts
no!!! go to www.piercemanifolds.com they are the best! cheap prices too
#7
Banned. I got OWNED!!!
Join Date: Nov 2002
Location: KING COUNTY, WA
Posts: 4,980
Likes: 0
Received 0 Likes
on
0 Posts
how do i figure?
well for one the stock air horns extend a little over 2 inches out from the carbeurator and flow directly in
the k and n filter does not have openings in on the end to allow air to directly flow into the airhorns
here i made a nice littel diagram for you...
well for one the stock air horns extend a little over 2 inches out from the carbeurator and flow directly in
the k and n filter does not have openings in on the end to allow air to directly flow into the airhorns
here i made a nice littel diagram for you...
Trending Topics
#10
RicanRider
http://www.cbperformance.com/catalog.asp?ProductID=561
I am currently using the red one 6". All I did was trim the wire mesh and the foam. Fits perfect after you shorten it a bit to fit between the carb and the oil neck ....
I am currently using the red one 6". All I did was trim the wire mesh and the foam. Fits perfect after you shorten it a bit to fit between the carb and the oil neck ....
Last edited by JoseReyes; 03-19-05 at 01:17 AM.
#12
RicanRider
Originally Posted by Gregs
Jose, i have a 48 dco with the "stock" long air horns, will the 4 3/4" filter work for me without having to trim anything?
No,,,,
with the stock air horns, you will need minimum of 1" clearance between the top of the filter plate and the horn. I have one of the 4 3/4 and it was to short. You will need to get the 6" and then cut the wire mesh down...
I bought the 6" and cut off about 1" to 1 1/2" to make it fit between the weber base and the oil neck....
You will need the K&N filter assambly to go with the Unifilter.... I had to modify it just a little. no big deal.... Had to use a different Screw on the top to make it fit... Should be an easy fix for you...
here is a view of it;
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM