weber 45 doce help
#1
New to the Club!
Thread Starter
Join Date: May 2020
Location: alexandria va
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
weber 45 doce help
my weber 45 doce wont idle when i start it i have to regulate the rpm to keep it alive but when i go to ajust it the rpm it shoots up to 3k-4k and stays there and some times when i get it to idle around 2k the moment u hit the gas at all it gets stuck at 4k the venturi leeks gas would that be caused by fule pressure is at 2.1/5 psi but could it be a float hight problem
chokes 36
idle jets f8 60
12a stock port
i
chokes 36
idle jets f8 60
12a stock port
i
#2
Check your float level.
Check your needle valve.
Check for vacuum leaks.
Set your idle.
Buy an AFR gauge.
Set the rest of your carb by looking online tutorials on DCOE 45 or buy a book.
For my stock port 36mm chokes were too small, I went to 38mm.
Check your needle valve.
Check for vacuum leaks.
Set your idle.
Buy an AFR gauge.
Set the rest of your carb by looking online tutorials on DCOE 45 or buy a book.
For my stock port 36mm chokes were too small, I went to 38mm.
Thread
Thread Starter
Forum
Replies
Last Post
tboltkc
1st Generation Specific (1979-1985)
3
07-11-06 01:29 PM
JoeNoble
1st Generation Specific (1979-1985)
13
12-31-05 12:36 PM