Does anyone know where I can get that vacuum spider/manifold that goes to the oil injectors on the SE? I could rig something up, but it's a lot cleaner with the spider----mine cracked.

Mike

 

Mazdatrix sells them, I believe.

 

mazdatrix, the dealer or post a want to buy ad here on the forum in the appropriate section.

 

Mine broke too but they want like 40$ for the spider and vac hoses online. I used some JB weld and rebuilt my existing spider and replaced all my vac hoses with nice silicone ones. They list it as for 86 models up but I think its the same looking hose routing..

http://www.mazdatrix.com/getprice.as...4-VACSPIDER-NT

 

Mazdatrix has the FC ones. There is a difference, though. The FC spider has a larger inlet hose on it. You would need to reduce it down to connect to an SE manifold. I know that the OP is running an S5 mani. Those don't normally have the same type of spider. They have a tube from the inlet duct which feeds a metal spider that goes under the UIM. This then has the small lines that connect to each oil injector.

Mike: If you can wait until I return from Europe (be back in May), I have a couple spare SE spiders if you need one.

 

https://www.rx7club.com/1st-generation-specific-1979-1985-18/vacuum-spider-problem-whats-best-solution-707320/