Use Microtech LTX12s on a 13B 4-port
08-15-07, 03:13 AM
#1
FrankeRX7
Thread Starter
Use Microtech LTX12s on a 13B 4-port
Hi
I´m thinking of using my Microtech on a 13B 4port with carb.
What do i need to convert from carb to ECU controlled injectors/ignition, or is it best to keep the ignitionsystem as it is and just change the fuel system.
Franke
I´m thinking of using my Microtech on a 13B 4port with carb.
What do i need to convert from carb to ECU controlled injectors/ignition, or is it best to keep the ignitionsystem as it is and just change the fuel system.
Franke
08-15-07, 06:22 AM
#2
Hunting Skylines
Join Date: Apr 2001
Location: Brisbane, Queensland, Australia.
Posts: 3,431
Likes: 0
Received 2 Likes
on
2 Posts
If you're going to EFI you might as well do the ignition. It's easy. All you need is a S4 or S5 crank angle sensor and some suitable ignition coils. The LTX has the igniters built into the ECU so I'd recommend using some dual post coils like the ones Microtech sells.
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM
