Use Microtech LTX12s on a 13B 4-port
 

Hi

I´m thinking of using my Microtech on a 13B 4port with carb.

What do i need to convert from carb to ECU controlled injectors/ignition, or is it best to keep the ignitionsystem as it is and just change the fuel system.


Franke

If you're going to EFI you might as well do the ignition. It's easy. All you need is a S4 or S5 crank angle sensor and some suitable ignition coils. The LTX has the igniters built into the ECU so I'd recommend using some dual post coils like the ones Microtech sells.

My Microtech is programmed for a 20B, is it possible to still use this but only for two rotors?

Franke