1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

unclear: about rats nest

Thread Tools
 
Search this Thread
 
Old Jul 7, 2008 | 11:18 AM
  #1  
spottedfrog's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2002
Posts: 190
Likes: 0
From: Grand Junction Colorado
unclear: about rats nest

Starting on page 19 and the oil vent hose T fitting.
I am unsure or the terminus of the T fitting branches.
I have one from the upper oil fill neck going to my T fitting, but where do the other hoses conect to the T fitting from?
I really need Pictures please.
also I thought the instructions said some thing about disconecting the lower oil filler vent hose from the fire wall but think I missed where its suposed to hook back up.

thanks.
Reply
Old Jul 7, 2008 | 11:01 PM
  #2  
djessence's Avatar
djessence
 
Joined: Aug 2007
Posts: 2,063
Likes: 0
From: Alberta, Canada
https://www.rx7club.com/showthread.p...highlight=halp

post 5 should help.

filler tube goes to purge valve which connects to carb vent iirc
Reply
Old Jul 7, 2008 | 11:03 PM
  #3  
spottedfrog's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2002
Posts: 190
Likes: 0
From: Grand Junction Colorado
BTT

I on my days off and only have a little time with my car,
thanks

posted at the same time oops.
Reply
Old Jul 7, 2008 | 11:16 PM
  #4  
DivinDriver's Avatar
1st-Class Engine Janitor
Tenured Member 10 Years
iTrader: (15)
 
Joined: Jun 2008
Posts: 8,376
Likes: 30
From: Chino Hills, CA
Knowing the year would help... the rats nest changed year to year.
Reply
Old Jul 7, 2008 | 11:28 PM
  #5  
spottedfrog's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2002
Posts: 190
Likes: 0
From: Grand Junction Colorado
Car is a 1985 GSL with A/C.



"filler tube goes to purge valve which connects to carb vent iirc
__________________
-Jesse-"


there is a top filler hose, and a lower filler hose that goes tward the fire wall.
Reply
Old Jul 8, 2008 | 10:37 AM
  #6  
spottedfrog's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2002
Posts: 190
Likes: 0
From: Grand Junction Colorado
bump
Reply
Old Jul 8, 2008 | 03:25 PM
  #7  
spottedfrog's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2002
Posts: 190
Likes: 0
From: Grand Junction Colorado
Here is what I have done:
Attached Thumbnails unclear: about rats nest-upperoilventtopurgevalve.jpg   unclear: about rats nest-loweroilvent.jpg   unclear: about rats nest-fromsolinoid.jpg  

Last edited by spottedfrog; Jul 8, 2008 at 03:29 PM. Reason: To get photos right
Reply
Old Jul 8, 2008 | 06:34 PM
  #8  
djessence's Avatar
djessence
 
Joined: Aug 2007
Posts: 2,063
Likes: 0
From: Alberta, Canada
yes leave it connected. to the bottom one(on the housing not the filler tube) IIRC.

You can trace the hard line but im pretty sure it goes to the charcoal canister
Reply
Old Jul 8, 2008 | 06:46 PM
  #9  
spottedfrog's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2002
Posts: 190
Likes: 0
From: Grand Junction Colorado
Yes the bottom one goes to the charcoal canister.
Is every thing else ok?
thanks
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
17
Jun 3, 2024 03:25 PM
LongDuck
1st Generation Specific (1979-1985)
12
Oct 7, 2015 08:12 PM
Jetlag
3rd Generation Specific (1993-2002)
4
Sep 29, 2015 06:52 AM




All times are GMT -5. The time now is 04:26 PM.