1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

turbo swap: help me with my starter and tranny wiring

Thread Tools
 
Search this Thread
 
Old May 21, 2004 | 07:02 PM
  #1  
82streetracer's Avatar
Thread Starter
8/1 Building/Drive Ratio
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jan 2002
Posts: 2,397
Likes: 1
From: Mound, MN
turbo swap: help me with my starter and tranny wiring

okay, on the starter, there is a spade connector that is the starting wire, there is also a wire with a large loop that attaches either to the battery side or the starter side of the starter soleniod, which one is it. I have a electrical diagram but it is not clear on this one.

second, in addition to these two wires, there are two more with butt connectors on them.

they are red and green, and I believe they are the reverse lights if Im not mistaken.

well, the s4 turbo tranny has 4 wires comming out, 2 green and 2 red. I know the TII trannys have a neutral safety switch in addition to the reverse light switch, how do I find out which one is which.
Reply
Old May 21, 2004 | 07:29 PM
  #2  
680RWHP12A's Avatar
Banned. I got OWNED!!!
 
Joined: Aug 2002
Posts: 4,666
Likes: 2
From: chatsworth,Ca.
the black and yellow wire goes to the starter solinoid...the big fat black one goes to the starter solinoid...from the battery
the reverse lights are 1 red wire and 1 green wire
Reply
Old May 21, 2004 | 08:24 PM
  #3  
82streetracer's Avatar
Thread Starter
8/1 Building/Drive Ratio
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jan 2002
Posts: 2,397
Likes: 1
From: Mound, MN
thanks
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Professorpeanutrx7
New Member RX-7 Technical
5
Aug 15, 2015 01:38 PM
befarrer
2nd Generation Specific (1986-1992)
4
Aug 14, 2015 04:18 PM




All times are GMT -5. The time now is 05:22 AM.