Can somone tell me the best place to tap into or what hose to t into on a 13b n/a for my turbo drain line.

 

can I tap into the block off plate for the OMP for my oil return?

 

no, that wouldent be nice..just drill and tap your front cover to accept a fitting of your choice. or take your oil pan and drill and eather tap or have it aluminum welded with a fitting of your choice. its your discision..although i would go with the oil pan one cause that would look nicer. and have it welded so it doesent give you a headache in the long run.

:AA:

 

oil pan drains dont work that great there isnt much of a angle to let the turbo gravity feed. Drill into front cover right under the omp. Or staright down if you will into the cover.

 

that was my first option..

:AA:

 

you can also do it like this http://www.camdensuperchargers.com/index.php?pag=305

 

Here:

https://www.rx7club.com/showthread.p...ight=oil+drain

Next time I won't be so nice.