Turbo II trans in First gen GSLE
03-05-04, 07:41 AM
#1
Junior Member
Thread Starter
Join Date: Mar 2004
Location: Dubuque, IA
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Turbo II trans in First gen GSLE
Hey everyone,
I am currently building a nice first gen gsle car with a turbo II motor. My question, will the stock shifter of a turbo II trans fit into the stock hole for a first gen trans? (ie will the shifter **** be in the same place?) I can build the trans mounts and engine mounts easy enough, but I don't want to have to redo the interior of my car to fit the stronger trans.
Does anyone have examples of putting a s5 13 bt turbo II motor and trans in a first gen gsle?
Thanks
Greg
I am currently building a nice first gen gsle car with a turbo II motor. My question, will the stock shifter of a turbo II trans fit into the stock hole for a first gen trans? (ie will the shifter **** be in the same place?) I can build the trans mounts and engine mounts easy enough, but I don't want to have to redo the interior of my car to fit the stronger trans.
Does anyone have examples of putting a s5 13 bt turbo II motor and trans in a first gen gsle?
Thanks
Greg
03-05-04, 01:33 PM
#3
I Push My Car Real Fast!
Join Date: Jan 2003
Location: Riverside CA
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
you can get it to fit correctly or you can cut out some of the hole and have it fit but it will be a little off center. check out the thread called "cronicals of a TII swap" he made mounts to do it correctly.
also you will have to modify your driveshaft to fit the TII trans. that is also covered in the thread.
also you will have to modify your driveshaft to fit the TII trans. that is also covered in the thread.
03-09-04, 06:27 AM
#4
Junior Member
Thread Starter
Join Date: Mar 2004
Location: Dubuque, IA
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 81Rex6port13b
you can get it to fit correctly or you can cut out some of the hole and have it fit but it will be a little off center. check out the thread called "cronicals of a TII swap" he made mounts to do it correctly.
also you will have to modify your driveshaft to fit the TII trans. that is also covered in the thread.
you can get it to fit correctly or you can cut out some of the hole and have it fit but it will be a little off center. check out the thread called "cronicals of a TII swap" he made mounts to do it correctly.
also you will have to modify your driveshaft to fit the TII trans. that is also covered in the thread.
Greg
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM
