A friend of mines oil cooler is leaking, and he has the oppertunity to buy a turbo II and or a 2nd gen oil cooler. will either fit? surely one of you rotary guru's can help me.

 

There is a thread in the archive on how to add the 2nd gen cooler to a 1st gen. Has lots of pictures.

 

here you but you do need to simply search at times

https://www.rx7club.com/1st-gen-archive-71/cooling-oil-how-install-fc-oil-cooler-1st-gen-write-up-pics-478521/

 

also here is the brackets that you can use for the swap http://www.iscracing.net/new%20products.htm right next to the radiator

 

NA and TII fmocs are the same, don't pay more because it came from a TII.

 

I'm 17 and not the best with figuring things out, and i freakin put a 2nd gen oil cooler in from one of the write ups.

 

prices vary tho so dont be wall bashing

 

Pretty chill install, only tricky part was getting the lines fabbed up, i went to a hydraulic shop, and had some custom made to my lengths for 60 CDN bucks. Heres a pic of how i mounted them. Works great, takes longer to warm up, but the temp stays real steady especially at high highway speeds, I upgraded from the shyzen beehive. Greatly reccommend this Mod!

 

mhmm, all you really have to do is go to the junk yard and pick up a good condition fc oil cooler and lines, go to a muffler shop and get muffler clamps and she's done

Iam not bashing, I'm just trying to say its a good easy upgrade

 

Dude!!!You mounted the oil cooler up the wrong way