Anyone have a pic of the front cover turbo drain on a -se front cover? I need to take my front cover to a machine shop and want him to see how it's done.. Thanks

 

i do... e-mail me and i will send you some pics

robert@rotaryshack.com

 

e-mail sent.. I didn't see you at 7stock this year.. Did you go?

 

Thanks, got the e-mail .. What size of a hole and threads should i get tapped into the cover? I want to make some SS custom lines for my turbo

 

drill and tap for a 1/2 pipe or a 3/4 pipe thread hole...
if your going to use -an lines -10 to a 1/2 pipe thread adapter would work great with -10 stainless braided hose...

after my horrible expierence at last years sevenstock(all the chaotic un organized mayham) i decided to work and make money instead of going this year... i would like to go again tho if they get thier act together

 

I have to do the same thing but will do it to a 12a front cover so not to butcher a se cover as I need to have the shop turn my 12 cover into a 12aS5Turbo cover.
E-mail me those pics too please

Rotoryfan@yahoo.com

 

Pics send to you..

 

e-mail sent

 

I used a 1/2 NPT tap and a 23/32 drill bit (45/64 is the required drill bit size for the tap)

Im sure it can be done with a regular hand drill, no need for a machine shop, just buy the tap and bit it will be cheaper.

 

Thanks for the pictures guys. I noticed it too had an S5 OMP installed. Sweet! Hope I can find a shop to do mine.