1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

trans issue

Thread Tools
 
Search this Thread
 
Old Jun 2, 2014 | 08:57 PM
  #1  
rebel101150's Avatar
Thread Starter
Full Member
 
Joined: Jul 2013
Posts: 79
Likes: 0
From: Butler, PA
trans issue

so i'm happy I got my baby back on the road today. She has been running like I never left her, it turned out the master cylinder has a mild leak, I put fluid in and the brakes ran fine and the levels never dropped so it has to be pretty mild. However even running at idle the trans was smoking. It was mild and I barely noticed it until I saw the wisp of smoke in the sunlight. It runs/drives fine but it's always done that when I run it hard. Can't seem to find the dipstick to check the fluid levels but I find it pretty odd. It is a 12a tranny I had thrown in my gsl se just to get it back on the road. I have a 13b tranny a friend of mine seems to never be able to get around to putting in for me. Is the 12a tranny too weak for a 13b? wondering if the mild brake fluid leak is hitting the tranny and its burning off. Runs like a top otherwise.
Reply
Old Jun 3, 2014 | 09:18 AM
  #2  
t_g_farrell's Avatar
Waffles - hmmm good
Tenured Member: 20 Years
Community Favorite
iTrader: (1)
 
Joined: Jul 2004
Posts: 9,250
Likes: 464
From: Lake Wylie, N.C.
I think that fluid has collected on the yoke and is getting slung onto the exhaust. That tranny
should do fine on a 13B.

The manual transmissions have no dipstick, you have to undo the fill bolt and put your finger
in to check the level. Just like checking the diff level.
Reply
Old Jun 3, 2014 | 10:21 AM
  #3  
rebel101150's Avatar
Thread Starter
Full Member
 
Joined: Jul 2013
Posts: 79
Likes: 0
From: Butler, PA
Originally Posted by t_g_farrell
I think that fluid has collected on the yoke and is getting slung onto the exhaust. That tranny
should do fine on a 13B.

The manual transmissions have no dipstick, you have to undo the fill bolt and put your finger
in to check the level. Just like checking the diff level.
alright, it's a 79 12a trans so it needs to be swapped out anyways. mounted a little odd.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
befarrer
Old School and Other Rotary
2
Oct 5, 2015 03:30 AM
<<Ayrton>>
Interior / Exterior / Audio
0
Sep 5, 2015 09:38 PM
Steven_McKinley
General Rotary Tech Support
12
Sep 5, 2015 10:48 AM




All times are GMT -5. The time now is 04:27 PM.