swapping engines
#1
Full Member
Thread Starter
Join Date: Oct 2005
Location: baltimore, md
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
swapping engines
I got an 85' gsl-se for free and the the spex seals were no good on one of the rotors. With that car i was givin and 86 rx-7 that was wrecked but had a 13b in it as well. I stripped that car of everything i could use on it and junked it. I am now trying to switch the motors.
I removed the motor from the 85, took off the front housing and oil pan and switched them to the other motor. I then put the motor from the 86 into the 85. Everything went well thus far. I am now trying to connect all the sensors onto the new motor and there are more sensors then there are plugs on the wiring harness. I also dont know what to do as far as fuel injection. should i use the fuel injection from the 85 or 86? I'm so confused right now, i just don't know what to do. someone help me please.
I removed the motor from the 85, took off the front housing and oil pan and switched them to the other motor. I then put the motor from the 86 into the 85. Everything went well thus far. I am now trying to connect all the sensors onto the new motor and there are more sensors then there are plugs on the wiring harness. I also dont know what to do as far as fuel injection. should i use the fuel injection from the 85 or 86? I'm so confused right now, i just don't know what to do. someone help me please.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Azevedo
Other Engine Conversions - non V-8
26
03-01-19 09:19 PM
maikelc
3rd Generation Specific (1993-2002)
8
08-24-15 11:04 AM