Suspension options?
#1
pirate extrordinare
Thread Starter
Join Date: Mar 2006
Location: Oakland, MI
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Suspension options?
Ok, I've got an 80 RX7. I saw that racing beat sells some Eiback springs for it but they only sell the fronts. I haven't really been able to find many other options. I plan on swapping to a GSL-SE rear end(the whole assy.) and swapping the front as well to keep the 4x114.3 on all four corners. Is there any company that makes a good set of coilovers? I's just trying to find the best setup that I can. Any help is greatly appreciated.
#2
Full Member
Join Date: Apr 2002
Location: anchorage alaska
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
you can get coilover perches for the front that are an easy conversion for your stock struts, not sure whats available for the rear as it's a free coil, not a captured one as on a strut.
#3
ISC Racing again
on the right side at the top theres spring adjusters.
This is the second time I've pointed someone to ISC in the last 10 minutes, they should be payin me for this.
on the right side at the top theres spring adjusters.
This is the second time I've pointed someone to ISC in the last 10 minutes, they should be payin me for this.
#5
Respecognize!
leaf... apex....tricky. lol
im more than likely going to run a full racing beat setup if you want to see what that is like in person. should be done by july.
im more than likely going to run a full racing beat setup if you want to see what that is like in person. should be done by july.
#7
Full Member
Join Date: Apr 2002
Location: anchorage alaska
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bwaits
We can help on some things.
Hey bwaits, I only saw bushings, coils, caster/camber and shocks for 1g on your site... do you handle coilover perches as well?
Trending Topics
#9
Full Member
Join Date: Apr 2002
Location: anchorage alaska
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
aussie -
Am I correct in assuming that the coilover perches from racersareme.com won't work for a 2.5" coil? I allready have the uppers, camber plates and 2.5" coils.
Am I correct in assuming that the coilover perches from racersareme.com won't work for a 2.5" coil? I allready have the uppers, camber plates and 2.5" coils.
#10
pirate extrordinare
Thread Starter
Join Date: Mar 2006
Location: Oakland, MI
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Low Impedance
leaf... apex....tricky. lol
im more than likely going to run a full racing beat setup if you want to see what that is like in person. should be done by july.
im more than likely going to run a full racing beat setup if you want to see what that is like in person. should be done by july.
Everyone else, thanks for the info!
Thread
Thread Starter
Forum
Replies
Last Post