Suspension mod info
#1
Airflow is my life
Thread Starter
Suspension mod info
Please read and enjoy. Also post comments, suggestions, flames, etc...........................
www.pbandjracing.com go to the tech section, its the only article there so far.
www.pbandjracing.com go to the tech section, its the only article there so far.
#2
I read your email
Look'n good Carl! I can attest that this mod did wonders for the handling of my car. I did all of the watts links and only the lower control arms where they attach to the axle. Car handles great! I'll hafta try putting the lock-nuts on the uppers to see how it feels.
#4
EX Pres of DFW Drunks
Give me about 3 weeks and I'll tear into the suspension on mine...
I shoudl do it before these next track events, but I don't wanna screw anything up and I dunno if I have time time beforehand...
I shoudl do it before these next track events, but I don't wanna screw anything up and I dunno if I have time time beforehand...
#5
Rotary Enthusiast
Join Date: Feb 2003
Location: lol
Posts: 803
Likes: 0
Received 0 Likes
on
0 Posts
how many lower control arms, up front, have you destroyed, rx7 carl? Or have you ever replaced any, if so, how hard is it before I tear into the one I have to fix
good lookin site, layout and article, I give it an A+
good lookin site, layout and article, I give it an A+
#6
Airflow is my life
Thread Starter
Originally posted by 79+80+84_rx-7
how many lower control arms, up front, have you destroyed, rx7 carl? Or have you ever replaced any, if so, how hard is it before I tear into the one I have to fix
good lookin site, layout and article, I give it an A+
how many lower control arms, up front, have you destroyed, rx7 carl? Or have you ever replaced any, if so, how hard is it before I tear into the one I have to fix
good lookin site, layout and article, I give it an A+
I write about rear suspension, and you ask me a front suspension question?
I've never destroyed one thankfully. But I have replaced them before to replace the bushings and ball joints. Its not hard. Unbolt, bolt on.
Thanks for the A+.
Trending Topics
#8
Airflow is my life
Thread Starter
Thanks! What would you like to see? I plan a series of short articles dealing with common questions/topics. "How do I"............Adjust my accelerator pump, accel cable etc.
#9
RTFFAQ
Join Date: Jun 2003
Location: Olathe, KS USA
Posts: 1,049
Likes: 0
Received 0 Likes
on
0 Posts
I'm not a racer and probably won't be, so my wishes are skewed toward the how-do-I-make-this-a-fun-daily-driver point of view. That said, stuff like what you mentioned is good. You know the common procedures you've described to people, like the secondary rod that needs to be connected. I think you've got some stuff on your cardomain pages that would be useful. Are you going to pull that stuff to pbandjracing.com? I can never find the shortcut and just the other day I was thinking about something I saw there.
I know it takes time to maintain a web site (I manage one for my homeowners association). And I assume your primary goal is to get some revenue off this one. My hat's off to you for starting this and I hope it all works out.
I know it takes time to maintain a web site (I manage one for my homeowners association). And I assume your primary goal is to get some revenue off this one. My hat's off to you for starting this and I hope it all works out.
#10
Airflow is my life
Thread Starter
Yea exactly, sort of a shop manual supplement. I do plan to pull all that from my cardomain site and move it to pbandj. It'll be easier if I can consolidate it all there.
Yea its for my business primarily, but also some givebacks to the community to help out. And having potential future customers visit the site isint bad either. Thanks for the encouragement.
Yea its for my business primarily, but also some givebacks to the community to help out. And having potential future customers visit the site isint bad either. Thanks for the encouragement.
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-01-15 11:02 PM
rx8volks
Canadian Forum
0
09-01-15 10:46 PM