stupid people + rotaries = funny story
Thread Starter
Senior Member
Joined: Jul 2003
Posts: 342
Likes: 0
From: burkesville, kentucky
stupid people + rotaries = funny story
this might be more aptly suited for the lounge, but....
jorx81 and i go into town to get some hoses and clamps for my engine swap. to begin with, i ask the fellow working if he has the clutch line from the slave cylinder for an 83 rx7, and he informs me that he doesnt have it, and cant get it. he then says, "i take it you're working on an rx7." so then, we get the hose, and ask for 5/16" hose clamps. he responds, "by 5/16", do you mean clamps you tighten with a 5/16" socket?" we go on to inform him they are needed to fit 5/16" hoses. when he takes it up to the register and starts looking up the prices, joe asks him to see if he can get a price for a piston kit for the same car. despite our snickers, he looks for it. "cant get that one either. good luck finding it." i say, "well, hopefully i wont need a piston kit anytime soon." he says, "well, it IS a mazda. youll probably need it before too long."
who would have imagined such comic relief at autozone?
jorx81 and i go into town to get some hoses and clamps for my engine swap. to begin with, i ask the fellow working if he has the clutch line from the slave cylinder for an 83 rx7, and he informs me that he doesnt have it, and cant get it. he then says, "i take it you're working on an rx7." so then, we get the hose, and ask for 5/16" hose clamps. he responds, "by 5/16", do you mean clamps you tighten with a 5/16" socket?" we go on to inform him they are needed to fit 5/16" hoses. when he takes it up to the register and starts looking up the prices, joe asks him to see if he can get a price for a piston kit for the same car. despite our snickers, he looks for it. "cant get that one either. good luck finding it." i say, "well, hopefully i wont need a piston kit anytime soon." he says, "well, it IS a mazda. youll probably need it before too long."
who would have imagined such comic relief at autozone?
Last edited by candyassmiler; Mar 18, 2005 at 02:51 PM.
Trending Topics
Rotary Enthusiast
Joined: Jul 2002
Posts: 1,119
Likes: 4
From: Virginia
Since you had asked for a clutch line to the slave cylinder, perhaps he thought you were referring to the slave cylinder piston. They are known to wear out on RX-7s, and he would have been accurate to speculate that you would probably need it eventually.
Rotary Freak
Joined: Jun 2003
Posts: 2,604
Likes: 1
From: Land Of Confusion southern MI, USA
they are so dumb, they have twice given me the wrong thermostat and gasket for my cavalier. i know this because it over heats with the thermo, but runs cool as **** without it.
Bimmer *****
Joined: Jun 2002
Posts: 2,199
Likes: 1
From: Plano, TX
Originally Posted by perfect_circle
they are so dumb, they have twice given me the wrong thermostat and gasket for my cavalier. i know this because it over heats with the thermo, but runs cool as **** without it.
EliteHardcoreCannuckSquad
Joined: May 2001
Posts: 4,126
Likes: 4
From: Acton, Ontario, Canada
Originally Posted by cosmicbang
Since you had asked for a clutch line to the slave cylinder, perhaps he thought you were referring to the slave cylinder piston. They are known to wear out on RX-7s, and he would have been accurate to speculate that you would probably need it eventually.
Lean Mean Speed Thingie
Joined: Mar 2002
Posts: 1,102
Likes: 0
From: Moscow, ID
haha, most parts guys have no clue about rx7's (except for me and brother, both rotorhead parts guys) Its funny, in our EPC (electronic parts catalog) it actually shows remanned heads for s4 rx7's, im curious what those actually are...
I didn't think he was really going to look it up. Most of the guys down there aren't too bad, but this guy..... Anyway we were snickering and he said we were comedians or just stoned, I never told him which.
I just saw this and found it funny. I **** with people the other way around at work (Advance Auto Parts). When they ask me a question concerning valves, lifters, pistons, etc, I just look at them like "Dude i don't know, my car doesn't have them" Then they ask "what do you drive" reply: "Mazda RX-7, it has a rotary".....retort-"thats those funny little car with the helicopter engines.....right?"
I feel bad, but ****'em for being ignorant.
DJ
I feel bad, but ****'em for being ignorant.
DJ
Full Member
Joined: Feb 2005
Posts: 121
Likes: 0
From: San Diego
Most of the Autozone/Kragen (Schucks, Checker) guys are near minimum wage backyard mechanics... they use the computer to look up parts, a ASE masters in parts isn't necessary for the job.
Besides, there are plenty of people on this board that don't know **** about cars, even the RX7s that they drive.
So give the guys a break... the parts stores sell mostly alternators and brake pads... a specific knowledge of vehicles isn't necessary. Besides... its more fun to **** with the salespeople at dealerships.
Oh, and before anyone says it... I don't and never have worked at a parts store... but I slept at a Holiday Inn Express last night.
Besides, there are plenty of people on this board that don't know **** about cars, even the RX7s that they drive.
So give the guys a break... the parts stores sell mostly alternators and brake pads... a specific knowledge of vehicles isn't necessary. Besides... its more fun to **** with the salespeople at dealerships.
Oh, and before anyone says it... I don't and never have worked at a parts store... but I slept at a Holiday Inn Express last night.
Banned. I got OWNED!!!
Joined: Nov 2003
Posts: 850
Likes: 0
From: Mill Creek, WA
^^Good post. What's the ratio of rotaries to reciprocating? Probably less than the ratio of Macs to Windows machines. How many of you would know jack squat about opening a web browser on a Mac? Would it matter if you didn't?
counting the days...
Joined: Mar 2005
Posts: 186
Likes: 0
From: Canaan, CT
One time someone asked me if my 85 GS had a diesel!!!
Any body know where the turn signal fluid reservoir is on these damn things?!
Heater core on old school beetle (or pick any other air cooled car)
Trans dipstick for a 96 Sunfire with a 2.2 eng and auto trans
Excuse me, I wanted to order some counterclockwise spinners...
reverse polarity battery for my european tractor...
Can I Astroglide in the place of grease when installing my u-joints?
lol...My Girlfriend came up with those last three pranking her work(Sears Auto Center) on her day off...
Any body know where the turn signal fluid reservoir is on these damn things?!
Heater core on old school beetle (or pick any other air cooled car)
Trans dipstick for a 96 Sunfire with a 2.2 eng and auto trans
Excuse me, I wanted to order some counterclockwise spinners...
reverse polarity battery for my european tractor...
Can I Astroglide in the place of grease when installing my u-joints?
lol...My Girlfriend came up with those last three pranking her work(Sears Auto Center) on her day off...