I stripped my Nikki carb, came off a 83. I only need the accelerator cable and distributer vac lines. Do I block off all other ports, or is there any I leave unplugged?, Which ports do I use for the distributer hoses?
Thanks

 

Look for the Rats Nest Removal tutorial, I dont have the link handy.

It shows fairly well what ports to use, as well as I had a thread called Rats nest removal HALP, which has some good info and pics from some forum members IIRC

Try and find some links for ya

 

You still need some form of vent for the oil filler tube.
Need the Dizzy one

heres a thread i had https://www.rx7club.com/1st-generation-specific-1979-1985-18/halp-rats-nest-removal-714749/

http://maz_tutorials.ten15.net/Tutorial_1.pdf

 

OK, I got the dizzy lines figured out, Mine had a holley setup with no lines at all on it so the tutorial got me confused due to everything in it that I don't have on mine. can I just vent my oil fill to the air cleaner? In your link you was talking about the carb vent, Does it get capped off also?
Thanks

 

**** i better go back and read my thread lol

So you have a holley? Or a stripped nikki?

The oil filler vent should be put to a PCV valve. there are a few active threads on it ATM. Some people vent to just the air but its not recomended. Cant remember why though.

Carb vent also ties into the PCV i believe, but i am unsure on a stripped nikki, would assume you also wanna tie it in?

 

I got a stripped Nikki now, I had a holley on it when I got it but it was a incomplete setup, no lines of any type on it