1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

steering column question

Thread Tools
 
Search this Thread
 
Old Aug 25, 2008 | 06:54 PM
  #1  
buldozr's Avatar
Thread Starter
Perk adds +20% to boost
Tenured Member 05 Years
iTrader: (1)
 
Joined: May 2008
Posts: 148
Likes: 0
From: Richardson, Tx
steering column question

Are these steering columns rebuildable(are parts available), I have alot of play in mine when turning wheel left and right aswell as when applying pressure upwards their is about a half inch of play. Havnt torn into it yet due to one of the afmkt steering wheel screws is stripped out so I have to bust out the eaze-out before I can find the culprit. Any thoughts would be appreciated.
Reply
Old Aug 25, 2008 | 07:44 PM
  #2  
djessence's Avatar
djessence
 
Joined: Aug 2007
Posts: 2,063
Likes: 0
From: Alberta, Canada
couple threads about both types of play. bushings and whatnot fix alot of the slop.

Jeff20B had a good thread about the forward backward play and how he fixed it.

Try and find it for you
Reply
Old Aug 25, 2008 | 07:47 PM
  #3  
Sgt Fox's Avatar
Stigulus Moderatorai
Tenured Member: 20 Years
Liked
iTrader: (3)
 
Joined: Feb 2004
Posts: 2,109
Likes: 32
From: Canada
Do a search for wonder steering. There has been quite a few posts about removing the slop from the steering box. You may also want to check your idler arm for play as well.

As for the telescoping of the steering column, the shaft is a two piece system, designed to collapse in an accident. There is a nylon safety rivet joining the two halves, which has been known to sheer. You can drill out the old one and replace it with either an aluminum rod or a nylon rod.
Reply
Old Aug 26, 2008 | 11:04 AM
  #4  
buldozr's Avatar
Thread Starter
Perk adds +20% to boost
Tenured Member 05 Years
iTrader: (1)
 
Joined: May 2008
Posts: 148
Likes: 0
From: Richardson, Tx
its not telescoping yet(although my brothers' 88 is...), aparently I was searching for the wrong thing but I will start reading more into the FSM. I have to install the multifunction/headlight switch at the same time so it will be like knocking out two birds with one stone.
Reply
Old Aug 26, 2008 | 12:53 PM
  #5  
buldozr's Avatar
Thread Starter
Perk adds +20% to boost
Tenured Member 05 Years
iTrader: (1)
 
Joined: May 2008
Posts: 148
Likes: 0
From: Richardson, Tx
ohh, then clunk noise and play appears to be entirely in the column from what I can tell, also the movement is not a telescoping movement but a 'tilt' movement as if the car had a tilt wheel...
Reply
Old Aug 26, 2008 | 07:32 PM
  #6  
Sgt Fox's Avatar
Stigulus Moderatorai
Tenured Member: 20 Years
Liked
iTrader: (3)
 
Joined: Feb 2004
Posts: 2,109
Likes: 32
From: Canada
Only thing I could think that would cause the tilting would be the bracket that holds the column in place under the dash has loosened.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
matty
Suspension/Wheels/Tires/Brakes
12
Jan 18, 2020 10:39 AM
Kruel13
1st Generation Specific (1979-1985)
24
Sep 16, 2015 09:08 AM
c0rpse
2nd Generation Specific (1986-1992)
1
Aug 25, 2015 11:50 PM




All times are GMT -5. The time now is 03:07 AM.