starter - hot start assist
starter - hot start assist
I forgot to undo the other bolt on the starter solenoid that goes to the hot start assist motor and puled apart the fusealbe link when i removed the starter. What effects will I notice if this is gone? Anything I should do to compenste with a hot motor (hold the pedal halfway down etc).
If the Hot Start Crap has been removed do you even need the Fuseable Link Wire on the Starter???
I've always been curouis about that to.
I have a Completly Stripped down Street Ported and whatever (Pinnapple Racing Motor) w/ Holley Set-UP and RB Complete Exaust System.
Just another what other piece of Elec Crap I can remove Question.
sgieldon
steve
I've always been curouis about that to.
I have a Completly Stripped down Street Ported and whatever (Pinnapple Racing Motor) w/ Holley Set-UP and RB Complete Exaust System.
Just another what other piece of Elec Crap I can remove Question.
sgieldon
steve
Originally posted by sgieldon
If the Hot Start Crap has been removed do you even need the Fuseable Link Wire on the Starter???
If the Hot Start Crap has been removed do you even need the Fuseable Link Wire on the Starter???
Thanks for the info on this one.
Like I said in my Reply, I've always wondered if that link should be there or not since I have had
*6= 1stGens* that I have stripped down the Bay to include the Rat's **** and have always said to myself (Self) what other purpose does this Link Include except for having a Backup in case I need a Fuseable Link somewhere else.
Thanks For The Info.
sgieldon
steve
Like I said in my Reply, I've always wondered if that link should be there or not since I have had
*6= 1stGens* that I have stripped down the Bay to include the Rat's **** and have always said to myself (Self) what other purpose does this Link Include except for having a Backup in case I need a Fuseable Link somewhere else.
Thanks For The Info.
sgieldon
steve
Originally posted by Jeff20B
1/4 to 1/2 or so. You'll develope a feel for it quickly.
1/4 to 1/2 or so. You'll develope a feel for it quickly.
Trending Topics
Yesterday here in Eugune,OR it was 92 and I drove around all day spending all kinds of $$$$ on my RX and some Vodka of course.
I started the Babe 10-12 times and never touhed the pedal once until I put it in gear.
But I have a (Holey) set-up, not sure about stock or others.
Although She is a 3 Pumper in the Morning, But Girls will be Girls.
After reading this Thread I was curious too considering everything is stripped out and a really hot day to boot.
OK maybe 92 is not that hot where everybody else lives, but it is Here in Oregon.
Have a Good One.
P.S. Anybody in Oregon or Washington going to the Portland Speedway this weekend for the Races????
sgieldon
steve
I started the Babe 10-12 times and never touhed the pedal once until I put it in gear.
But I have a (Holey) set-up, not sure about stock or others.
Although She is a 3 Pumper in the Morning, But Girls will be Girls.
After reading this Thread I was curious too considering everything is stripped out and a really hot day to boot.
OK maybe 92 is not that hot where everybody else lives, but it is Here in Oregon.
Have a Good One.
P.S. Anybody in Oregon or Washington going to the Portland Speedway this weekend for the Races????
sgieldon
steve
yeah, how ya like this weather, different eh, where are you at, Id like to have someone knowledgable about first gens look at my car and or tell me what I should do for cheap (read free) mods
Thread
Thread Starter
Forum
Replies
Last Post
ray green
1st Gen General Discussion
2
Sep 2, 2015 06:35 AM
rx8volks
Canadian Forum
0
Sep 1, 2015 11:02 PM




