Start button kit
#1
Senior Member
Thread Starter
Join Date: Apr 2003
Location: Winnipeg MB
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Start button kit
Would anyone be intrested in a complete kit which would install a start button in your RX-7 in about 20 minutes??
The button would replace your cig lighter...and be a matter of you removing the cig lighter...placing the button and its mounting plate in its place...running the wires to the ignition...and connect the wires as per the instructions (maybe on DVD)
The button would replace your cig lighter...and be a matter of you removing the cig lighter...placing the button and its mounting plate in its place...running the wires to the ignition...and connect the wires as per the instructions (maybe on DVD)
Trending Topics
#10
Senior Member
Thread Starter
Join Date: Apr 2003
Location: Winnipeg MB
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
antena switch?? the kit will be able to be mounted anywhere...I can custom make plates for where ever you want it...and where the lighter is does look cool
#11
Senior Member
Thread Starter
Join Date: Apr 2003
Location: Winnipeg MB
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
here are some pics...ok there too big.
go here
http://www.geocities.com/frondeur101/HPIM0191.JPG
to see
go here
http://www.geocities.com/frondeur101/HPIM0191.JPG
to see
#14
Senior Member
Thread Starter
Join Date: Apr 2003
Location: Winnipeg MB
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
hotwire it in....my dad does that for his lexus...he runs power to it up from the lighter...through the A pillar...accross the headliner to the map light...where he has an attachement there...no anoying chord
#16
<l><l>
Join Date: Feb 2002
Location: houston (katy), tx
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
k this might just be a stupid question, but what would stop someone from just breaking the window (cause none i know of came with security systems and just pressing the button and driving away with the car? or is it hooked up so the key has to be inserted?
<l><l>
<l><l>
#17
Senior Member
Thread Starter
Join Date: Apr 2003
Location: Winnipeg MB
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
its hooked up so the key has to be inserted...like on the merc, aston S2000 etc. some think its silly, but its more for the cool factor than practicality...if we all wanterd practicality we would not drive 2 seat 20 year old cars which can only be fixed by gods
#20
Senior Member
Thread Starter
Join Date: Apr 2003
Location: Winnipeg MB
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Its a bit more complicated than that i have found...you need to make a relay system for the entire ignition...not hard to do, but more complicated than i originaly thought.
#25
Senior Member
Thread Starter
Join Date: Apr 2003
Location: Winnipeg MB
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
it will be....im going to put it on stirlings "back yard mechanics coop"
http://www.sterlingmetalworks.com/bymcforum/
http://www.sterlingmetalworks.com/bymcforum/