sound proofing tar
#1
Lycanthropy
Thread Starter
Join Date: Apr 2004
Location: Wisconsin
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
sound proofing tar
like the title antone got a good way to take of the sound proofing tar? i got a hammer a scraper but i think i hear wd-40 sprayed on helps? i hate that tar
#2
Yeah, shutup kid.
Get dry ice, break it up into small chuncks and spread it all over the tar. Let it sit until you can hit the tar with a hammer and break it off. Any bits left scrape off with the scraper.
#3
Airflow is my life
Originally posted by coldy13
Get dry ice, break it up into small chuncks and spread it all over the tar. Let it sit until you can hit the tar with a hammer and break it off. Any bits left scrape off with the scraper.
Get dry ice, break it up into small chuncks and spread it all over the tar. Let it sit until you can hit the tar with a hammer and break it off. Any bits left scrape off with the scraper.
Trending Topics
#12
Never Follow
iTrader: (18)
I had a hard time finding dry ice when i was gonna do this. It was in the middle of winter, so I ended up useing an old chisel and hammer, pretty quick work, I guess teh cold weather made it brittle enough that it came off in big chunks. Weighed it, 25lbs, not bad I guess. But I removed mine in order to find and fix rust, not remove weight.
#13
Full Member
Join Date: Jul 2002
Location: Perth, Western Australia
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
or you could warm it up... yeah it makes it a bit sticky but its just as effective and if you find the right temp you can pull off lots at a time with little residue.... rather be doing that in winter than playing with dry ice
#14
add to cart
Join Date: Jun 2002
Location: Saskatoon, SK & Montreal, PQ
Posts: 4,180
Likes: 0
Received 0 Likes
on
0 Posts
I stripped the bituthane from the interior of a 280ZX once. I simply removed the carpet, then let the car sit in the hot sun for a few days. The interior got so hot that when I opened the doors and started peeling the stuff off, no tools were required.
Thread
Thread Starter
Forum
Replies
Last Post