sellin my rims cheap, 17's!!
sellin my rims cheap, 17's!!
I have these on my FC but I think they would look nice on an FB as I have the 4 bolt FC hub and they will bolt right onto an FB. 17 inch ADR stage II w/ sumitomo HTRZII (215/45/YR17 front and 235/45/YR17 rear). they have about 8k miles on them and I will sell complete for $500.00 + shipping. I paid about $1200 w/ tires...they look really nice and are in perfect shape but I'm going to be putting 16 inch Advans on and I don't need 2 sets of rims.
Pics of the car w/ them on at this link:
https://www.rx7club.com/forum/showth...5&pagenumber=1
Thanks!! e-mail me at jrotaryb@hotmail.com if interested.
Pics of the car w/ them on at this link:
https://www.rx7club.com/forum/showth...5&pagenumber=1
Thanks!! e-mail me at jrotaryb@hotmail.com if interested.
Originally posted by Manntis
A note for newbies - any rim that bolts onto a 4 bolt pattern (4x113.4) FC will ONLT fit a GSL-SE... all other 1st gens have a 4x110 bolt pattern and will not fit these rims
A note for newbies - any rim that bolts onto a 4 bolt pattern (4x113.4) FC will ONLT fit a GSL-SE... all other 1st gens have a 4x110 bolt pattern and will not fit these rims
Originally posted by SoRRoW
They will still bolt to a non GSL SE car
They will still bolt to a non GSL SE car
Trending Topics
They are 4*114, non SE first gens have 4*108 unless somebody swapped on SE front suspension and the rear end.
Or you are using wheel adpaters

These are close to looking like what you are selling, don't look to bad on a firstgen even without paint. I imaging the tires would need to be replaced so that they would not rub.
What size are the rims you are selling? width? offset?
Do the rims have hoes for both 4*100 or 4*144?
Later
Randy
Or you are using wheel adpaters


These are close to looking like what you are selling, don't look to bad on a firstgen even without paint. I imaging the tires would need to be replaced so that they would not rub.
What size are the rims you are selling? width? offset?
Do the rims have hoes for both 4*100 or 4*144?
Later
Randy
Thread
Thread Starter
Forum
Replies
Last Post
Rotary12Ahead
1st Generation Specific (1979-1985)
9
Oct 29, 2015 03:16 PM
NickNac113
1st Generation Specific (1979-1985)
13
Oct 1, 2015 09:25 PM



