Pics of my new brakes and new turbo!
#1
10.32 @ 133
Thread Starter
Join Date: Mar 2001
Location: Sydney, Australia
Posts: 1,362
Likes: 0
Received 0 Likes
on
0 Posts
Pics of my new brakes and new turbo!
These are going on my 1st gen RX7. They are FD RX7 calipers with Mercedes 300mm discs, or just under 12 inch discs.
New turbo is a Garrett GT35/40 with .70 cover and a 1.06 exhaust housing.
I pick the car up tomorrow with all the new gear!
New turbo is a Garrett GT35/40 with .70 cover and a 1.06 exhaust housing.
I pick the car up tomorrow with all the new gear!
#5
MY NEW NAME IS ROTARY 7S
Join Date: Jun 2002
Location: Cell Block 4 (LOCKDOWN)
Posts: 1,323
Likes: 0
Received 0 Likes
on
0 Posts
What set up is that a GSLSE with S4 4 piston calipers?
I would like to know,I got a GSLSE front set waiting to be put on my car,and I can get some 4 piston TII calipers cheap..
I saw you got FD calipers,but what spindle and strut is that from
I would like to know,I got a GSLSE front set waiting to be put on my car,and I can get some 4 piston TII calipers cheap..
I saw you got FD calipers,but what spindle and strut is that from
#7
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,841
Received 510 Likes
on
345 Posts
I said it before... The front brakes of the 1st gen look totally German. With the hub/rotor combo... It's probably the 1st gen spindle/strut assembly with different wheel bearings and races. We just gotta figure out what Mercedes has 4 x 114.3 bolt pattern.
Or perhaps it's an entire spindle and strut assembly from a Benz... But I'd think that'd be harder to bolt into the 1st gen chassis as you'd have to deal with height and weight differences. Aftermarket springs and shocks should solve that though...
Geez... There are so many ways that one can go through with that... Tell us AJC.
Or perhaps it's an entire spindle and strut assembly from a Benz... But I'd think that'd be harder to bolt into the 1st gen chassis as you'd have to deal with height and weight differences. Aftermarket springs and shocks should solve that though...
Geez... There are so many ways that one can go through with that... Tell us AJC.
Trending Topics
#11
Tennis, anyone
Right on steve, Are you saying that you've got all 4 corners or just the fronts ? thats pretty cool,,get-it ?
12 inch drilled rotors. And your haveing the work done for you ? and let me get this straight. did you gather
the calipers from a dead FD ? and the rotors from a dead benz ? and knew the 2 would go together ? or was it somebody else did it and you bought the parts from them ? One would have to be real ******* good to know cars that well to pull that off,,,mate Good score !
Your cars been down,or running ? oh that turbo things cool too Lol. Transmission still tight ? Did you see the thread on ladder bars and 4 links for 1st gens ? cool stuffs. g'day mate.
12 inch drilled rotors. And your haveing the work done for you ? and let me get this straight. did you gather
the calipers from a dead FD ? and the rotors from a dead benz ? and knew the 2 would go together ? or was it somebody else did it and you bought the parts from them ? One would have to be real ******* good to know cars that well to pull that off,,,mate Good score !
Your cars been down,or running ? oh that turbo things cool too Lol. Transmission still tight ? Did you see the thread on ladder bars and 4 links for 1st gens ? cool stuffs. g'day mate.
#12
10.32 @ 133
Thread Starter
Join Date: Mar 2001
Location: Sydney, Australia
Posts: 1,362
Likes: 0
Received 0 Likes
on
0 Posts
I know the pics don't work anymore. Something has happened to my site overnight and I have my guys looking into it now.
Okay, I went to the workshop I go to and asked for FD calipers and massive discs. The struts are standard S3 RX7 (GSL-SE) and the springs are lowered King springs.
I don't think any Mercedes has that stud pattern, the hubs would have been machined to have the 4 x 114.3 stud pattern?
I will get details this afternoon and plenty of photos for you all
MikeLMR - Yah, standard
mark - Just got those on the fronts. On the back I already have bigger single piston calipers and discs.
Car has been off the road since November getting engine freshen up, new turbo and new brakes And I get it back this afternoon!
Okay, I went to the workshop I go to and asked for FD calipers and massive discs. The struts are standard S3 RX7 (GSL-SE) and the springs are lowered King springs.
I don't think any Mercedes has that stud pattern, the hubs would have been machined to have the 4 x 114.3 stud pattern?
I will get details this afternoon and plenty of photos for you all
MikeLMR - Yah, standard
mark - Just got those on the fronts. On the back I already have bigger single piston calipers and discs.
Car has been off the road since November getting engine freshen up, new turbo and new brakes And I get it back this afternoon!
#14
MY NEW NAME IS ROTARY 7S
Join Date: Jun 2002
Location: Cell Block 4 (LOCKDOWN)
Posts: 1,323
Likes: 0
Received 0 Likes
on
0 Posts
Ddi the FD calipers bolt right up?I dont see a custom braket,how about 4 piston calipers from a TII?
What master cyl do you plan on running?
I got an idea..make these as an upgrade for the first gen guys,Ill be more than happy to be a guinnie pig on the first set
What master cyl do you plan on running?
I got an idea..make these as an upgrade for the first gen guys,Ill be more than happy to be a guinnie pig on the first set
#15
Originally posted by SoRRoW
I dont see a custom braket
I dont see a custom braket
Nice work Steve, I'm sure I'll be doing something similar in the future (with the brakes). First I need a set of wheels that can handle the bigger rotors though.
Looks good! Go kick some *** wth the new turbo!
#16
10.32 @ 133
Thread Starter
Join Date: Mar 2001
Location: Sydney, Australia
Posts: 1,362
Likes: 0
Received 0 Likes
on
0 Posts
Standard Mazda master cylinder will be fine
I know my guy would like to sell these, I'll get a price for the kit this afternoon when I pick the carup!
I know my guy would like to sell these, I'll get a price for the kit this afternoon when I pick the carup!
#25
I Push My Car Real Fast!
Join Date: Jan 2003
Location: Riverside CA
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 79+80+84_rx-7
"years" ?!!?!?!?
WTF is that?!
"years" ?!!?!?!?
WTF is that?!