OK moving SE drive train to 85 gs body and want to keep EGI system. I have already harvested the emc and harness. question is what other wiring do i need to change?
If you have done this swap before please chime in.

thanks Gene

 

If you can, pull the ENTIRE GSL-SE harness. But if im remembering correctly, the engine controls are one on harness, and the chassis harness is on another, but may still have connections to the ecu.

 

all the wires that control the 13b fuel injection are attatched to the motor and run through the passenger side of the firewall. the only thing you will need to do is study the wiring diagram so you could send power to the ecm.