Sa project: Almost done
Trending Topics
#11
Well, thanks for the compliments guys. The car belongs to fellow member Kory_yahi. I am putting it together for the sevenstock meet. It's a 79 with a 83 12a. Stock with the mikuni 44phh and racing beat manifold and header system. It has performance springs,shocks and sway bars.
Holley red fuel pump and FPR.
After i get her running then i will probably update the coil system for him, it already has been updated with the electronic dist. I am in the middle of custom fitting a cold air box to go over the mikuni. It will take some fabricating and alot of think time but i will manage.
The trans is the stock 5 speed with a lightened steel flywheel and of course the 225mm clutch setup. Tires will be mounted after i finish polishing the weels. Tires are 195-60-13 sumitomo HTR200. Later on the brakes and rearend will probably be updated to the GSL with drilled and slotted rotors.
More pics to follow as it nears completion.
Holley red fuel pump and FPR.
After i get her running then i will probably update the coil system for him, it already has been updated with the electronic dist. I am in the middle of custom fitting a cold air box to go over the mikuni. It will take some fabricating and alot of think time but i will manage.
The trans is the stock 5 speed with a lightened steel flywheel and of course the 225mm clutch setup. Tires will be mounted after i finish polishing the weels. Tires are 195-60-13 sumitomo HTR200. Later on the brakes and rearend will probably be updated to the GSL with drilled and slotted rotors.
More pics to follow as it nears completion.
#13
Originally Posted by craigw1
nice job. very clean. lots of 'RB' in that engine bay
what made you decide to go for side draught over down draught ?
what made you decide to go for side draught over down draught ?
Thread
Thread Starter
Forum
Replies
Last Post