1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Running ruff

Thread Tools
 
Search this Thread
 
Old 01-28-04, 02:44 PM
  #1  
Junior Member

Thread Starter
 
red85's Avatar
 
Join Date: Aug 2003
Location: Spokane
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Unhappy Running ruff

I changed the clutch with my son on his 85 Rx7.
The motor ran great when we started, and now the starting is very bad, the car smokes for quite a while and smeels very rich with the choke out and warming up also the motor misses severly.
after its warm the car can't be driven as the sputtering motor dies constantly.
i can't see any wires or vacuum lines at the carb that have been knocked loose. are there any going to the tranmission or starter that if in the wong palce or missed wired could do this.
Old 01-28-04, 02:47 PM
  #2  
it WILL run

 
wwilliam54's Avatar
 
Join Date: Dec 2002
Location: Raleigh,MS
Posts: 2,017
Likes: 0
Received 0 Likes on 0 Posts
replace the plugs
and dont choke it as much
Old 01-28-04, 05:14 PM
  #3  
trainwreck

 
BigJim's Avatar
 
Join Date: Jun 2003
Location: Lake, Michigan
Posts: 1,725
Likes: 0
Received 1 Like on 1 Post
Compression check, same thing happened to me, i ended up blowing an apex because i tried to run it.
Old 01-28-04, 07:15 PM
  #4  
Airflow is my life

 
Rx7carl's Avatar
 
Join Date: Aug 2002
Location: Orlando, Fl
Posts: 6,736
Likes: 0
Received 1 Like on 1 Post
Check that your ignition sys is functioning. You may be running on the trailing system only. Use a timing light to see if all 4 plugs are firing. Oh and welcome to the board. We got members here from Spokane FYI.
Old 03-23-04, 04:17 PM
  #5  
Junior Member

Thread Starter
 
red85's Avatar
 
Join Date: Aug 2003
Location: Spokane
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Thanks for the help
plugs are new
All four are firing, the spark is a little orange
Is there anyone in the spokane area that can work on these?
how much commpression and in top or bottom plug hole?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
C. Ludwig
Single Turbo RX-7's
49
01-30-19 06:31 AM
Rotospectre
New Member RX-7 Technical
3
03-28-18 03:33 PM
turbo-minivan
General Rotary Tech Support
69
02-04-16 12:29 AM
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM



Quick Reply: Running ruff



All times are GMT -5. The time now is 10:19 AM.