Ruined ignition
#1
vrrmmmmm
Thread Starter
Join Date: Jul 2005
Location: BAY
Posts: 665
Likes: 0
Received 0 Likes
on
0 Posts
Ruined ignition
I bought an ignition off Rx7doctor and got it in my car and when i was putting the electrical portion into the ignition lock i busted the back side off (black side) and screws flew everywhere
did I ruin my ignitions eletrical portion? What should I do to make my car work ugh!!!
did I ruin my ignitions eletrical portion? What should I do to make my car work ugh!!!
#6
vrrmmmmm
Thread Starter
Join Date: Jul 2005
Location: BAY
Posts: 665
Likes: 0
Received 0 Likes
on
0 Posts
I put the new ignitioon on but it felt way to hard to turn the ey. so I lowered the steering column and removeed the cirular plug on the left side and upon reinsertion it blew up.
ugh. is there a way to fix this?
/treo 700p
ugh. is there a way to fix this?
/treo 700p
Trending Topics
#9
Lives on the Forum
iTrader: (13)
How did you manage to break the back portion of the electrical switch?
I presume that you are talking about where all of the wires are attached to the back of the electrical portion of the ignition switch?
If this is the case that electrical portion of the ignition switch now needs to be replaced.
I presume that you are talking about where all of the wires are attached to the back of the electrical portion of the ignition switch?
If this is the case that electrical portion of the ignition switch now needs to be replaced.
#10
vrrmmmmm
Thread Starter
Join Date: Jul 2005
Location: BAY
Posts: 665
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rx7doctor
How did you manage to break the back portion of the electrical switch?
I presume that you are talking about where all of the wires are attached to the back of the electrical portion of the ignition switch?
If this is the case that electrical portion of the ignition switch now needs to be replaced.
I presume that you are talking about where all of the wires are attached to the back of the electrical portion of the ignition switch?
If this is the case that electrical portion of the ignition switch now needs to be replaced.
yea... how do I fix it
#17
vrrmmmmm
Thread Starter
Join Date: Jul 2005
Location: BAY
Posts: 665
Likes: 0
Received 0 Likes
on
0 Posts
On the back of the ignition there are the 2 wires that go into it and look like they're soldered on. Well I broke that too. My car still starts without it though. There is like a green and red wire and I dont know which goes on the front or the back.
Also what do those too?
THanks
Also what do those too?
THanks
#19
vrrmmmmm
Thread Starter
Join Date: Jul 2005
Location: BAY
Posts: 665
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by chedda_j
Did someone try and steal your car? Then failed and stole your stereo? haha
#20
its supposed to do that
that whole assy has 3-4 clips on the wire pigtail end, just replace the whole thing. if theres any chance you lost the slides or the springs there is no way to repair the one you have. what i assume happened was you pushed it on without lining up the slot with the metal tab that comes out of the lock cyl.
isaac
isaac
#21
vrrmmmmm
Thread Starter
Join Date: Jul 2005
Location: BAY
Posts: 665
Likes: 0
Received 0 Likes
on
0 Posts
I replaced the part with 4 connectors that goes into the left side of the ignition assembly. But need to know what the 2 wires connected to the back of it go to/do
#22
its supposed to do that
i have always wondered that, but never bothered to look it up. you mean the wires that go into the lock cyl assembly? on the opposite end from the electrical ign switch?
isaac
isaac
Thread
Thread Starter
Forum
Replies
Last Post
ncds_fc
2nd Generation Specific (1986-1992)
19
09-15-15 12:03 AM