ok guys, ive looked in the faq for along time so answer my ? but i cant find anything solid, ok ive got some options here for rims this is for my gsl-se
ok a pair of
rota slip streams: 15x6.5 with a 40mm offset and a 73mm bore, i dont know what the bore is about

mb racing: 15x6.6 with a 38mm offset

i was hoping to find a pair of rims that had a lip on the backs

 

anyone?

 

with a 40 mm offset you will need a spacer for the front, the rear will fit

 

where can i pick up a spacer at, and what size, im new to this rim stuff so ill need a little guidence, and what about the 38mm offset will i need a spacer for that to?

 

try to find some wheels with +27 or somewhere around +20. spacers can be bought on ebay for cheap, but you might have some problems with the length of the studs.

 

well i found some konig rewinds that i like from the knonig websit, what would i have to do to run a 0 offset, the rims are 15x7 with a 0 offset

 

anyone

 

i believe a 15x7 with 0 offset should fit fine.

 

the bore refers to the hole in the middle of the wheel that the lug nut go around.
I got rid of the wheel bolts and went with thread in studs and lug nuts. some people don't like doing that, they say the studs loosen up. but I have never had a problem with it and I change my wheels alot from street to rain to race tires/wheels. just use lock tight red stud lock on them and they won't come out.

 

Depends on what sixe tire you are planning to run. An offset of 0 will stick out pretty far so if your car is lowered and/or if you have a high sidewall, it may rub on the fenders.

 

0 offset wil lstick out (maybe you can do fender flares to cover them up ) ...the konig rewinds i have on my FB have a 20mm offset and they sit flush

 

i' m running +40 rims on my gsl-se in a 16x7 with a 205/50/16 tire with no clearance issue on the front. i have about quarter inch clearance on the strut tower