Recently installed magnaflow muffler yellowing my bumper......
^^^I always loved those turn down exaust that you see on ,ost of the rotory's in Austrailia. Or at least the ones I see in FASTFOUR magazine. Carl thats going to look sick on your car.
I will tell you what i have done on mine to get rid of that, But i must make it known that i take no responsibility for any damage that you might do to yourself , your car , pets , house , lawn , or ozone layer.
I use this stuff called "spoke wash" its a real light duty acid that is used to remove brake dust and stuff from rims.
I spray it on wait about 2 minutes and then use a soft brush and wala its clean......
Jay
1984 FB
I use this stuff called "spoke wash" its a real light duty acid that is used to remove brake dust and stuff from rims.
I spray it on wait about 2 minutes and then use a soft brush and wala its clean......
Jay
1984 FB
Originally Posted by camocarl
Youll see when I get my new exhaust 4" dump tip installed. 

For the bumper soot issue, I just bent some galvanized steel sheet and bolted it to the underside of the bumper, using stock bolts.
Pic:
http://community.webshots.com/photo/...99631087qFPvhP
You could use aluminum too.
Pic:
http://community.webshots.com/photo/...99631087qFPvhP
You could use aluminum too.
Alexis's car with a Rotaflo with 4" dump tip
Here is my old exhaust, the yellow or black is from flames
If you stay on top of it, and not let it build up too much, with some rubbing compound, it will come off with some elbow grease.
Here is my old exhaust, the yellow or black is from flames
If you stay on top of it, and not let it build up too much, with some rubbing compound, it will come off with some elbow grease.




