FCinWV

iTrader: (8)

Does anyone have any experience with the kit from Racing Beat or upholstery experience in general ?

I have bought the kit and am now in the middle of installing them. Its proving to be a real bitch. They are so freakin tight I cant get them around to where you hog ring them.

Any advice/help would be appreciated

Thanks

Dave.

t_g_farrell

iTrader: (1)

I've heard they are easier put on when warm. Do you have the seats inside where its nice and
warm?

I'd be interested in any information on them as to ease of install, fit and finish, etc. Maybe post
some pics up while your doing it? I've never seen a thread on installing them yet.

kencunm

iTrader: (3)

I think I did them in the summer and let things get nice and warm out in the sun! Maybe let things sit in front of a fireplace? (not too close of course!) The warmer they are, the more pliable they will be. It is do-able! I've done both the short and the tall ones.

FCinWV

iTrader: (8)

Ohhh man so glad to hear someone else did this. Yeah I have them inside . I wonder if a heat gun at a fair distance would do the trick.


Also as for where the seats go way down in a groove I have no idea if Im supposed to clip that in or not. I dont see how its possible with the pliers and clips.

FCinWV

iTrader: (8)

Well my buddy came over and said " what the hell are you doing". Apparently I need to pull it inside out and do all this blah blah. So I may just have a local upholstery guy install them cause this has me stumped.

Nicholas P.

iTrader: (1)

If your paying that much I would honestly take it to a professional. It's like tinting windows :/

ourxseven

iTrader: (1)

I had some leather covers from leatherseats.com for my 2nd gen and to avoid the same frustration you are having I took them to an auto upholsterer to do. $75 each seat and they look perfect . unless you need the money for food or rent , or hate to pay other people for things , Id get a pro to do it .

DivinDriver

iTrader: (15)

Yes, the deep pleats are supposed to be hog-ringed to the bottom springs. They should have wire reinforcements running along the bottom of them - or at least pockets for the reinforcing wires.

Never used the RB kit. Made my own upholstery a couple times now over the years.

FCinWV

iTrader: (8)

Took the advice. Just got back from dropping them off at a local shop. Guy blew me away with the real process of how it is done. My foam was ripped and torn pretty bad in some places. He said $100 a piece and guarantees them to look OEM.


Done and done. NOW ON TO MY OWN RE-SPEED like coilover project MUWAHA

DreamInRotary

iTrader: (49)

Now you need to post pics so we can see what you're referring to - your interior is like a well kept secret and I've been dying to see it

DivinDriver

iTrader: (15)

I'll dig up what shots I have of the last time I worked on the seats, & current condition. I last did them about a decade ago, just barely starting to show some wear & fade.

I've actually got a pair of tired 80 highbacks parked in the garage waiting for me to re-do them, too. Haven't decided if I'm going back to factory black with them, or sticking with the current red/grey schema I've got on the FB seats currently in the car.